Follow-up. I found RX3206 open again, but haven't found the reason it keeps opening up. Shaun Advanced Electronics 224 West Riverview Ave. Fort Morgan, CO 80701 ----- Original Message ----- From: "Shaun" <satguy@xxxxxxxxxxxxx> To: "tech" <techassist@xxxxxxxxxxxxx> Sent: Friday, August 20, 2004 10:27 AM Subject: [TechAssist] Zenith A60M91W1 Problems > This 60 inch Zenith tv was dead. I installed a kit from Tritronics to repair > the 9-1978-1 module. When I reinstalled the board the set does turn on now > but the convergence is not working at all and the picture that does come up > goes brighter and darker in a pulsing way. Does anyone have any tips on this > problem? I checked the convergence module all the resistors are good. The > set is 40 miles away from the shop and I do not know if the +16 and -16 are > there but I would like to try and find any other problems on the 9-1978-1 > first. I also found RX3206 and R3252 open near the flyback. > > Shaun > > Advanced Electronics > 224 West Riverview Ave. > Fort Morgan, CO 80701 > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/