Hi Jack! That gear is included in that kit (221066). It is not available separate. Let me know if you need anything else. Thanks - Jason www.ExcelDistributingInc.com Jack <lightwizard_2000@xxxxxxxxx> wrote: > >In my earlier post I did not meant the side plate kit, >I meant the new and improved loading gear that moves >the carriage assy. The new one is black and is taller >so the teeth on the gear no longer fail. > >Jack > > >--- Jeff Dougherty <jeff@xxxxxxxxxxxxxxxxxx> wrote: >> >> Yes, that is for the whole side plate. >> >> Jeff >> FAX 1-413-280-0677 >> Intrepid Video & Electronics >> 501 Luther Rd >> Harrisburg, PA 17111 >> 717-909-8844 >> mailto:Jeff@xxxxxxxxxxxxxxxxxx >> www.9-11-2001tragedy.com >> www.intrepid-video.com www.tech-repair.net >> www.thetoolcaddy.com >> >> >> ----- Original Message ----- >> From: "Chaz" <chaz@xxxxxxxxxxx> >> To: <techassist@xxxxxxxxxxxxx> >> Sent: Sunday, January 13, 2002 1:37 PM >> Subject: [TechAssist] Re: VCR RCA VR506 timing >> >> >> > >> > I believe Jeff Dougherty said it was #221066 >> > >> > Chaz >> > --- >> > >> > >> > From: "Bill McFarland" >> <billmcfarland@xxxxxxxxxxxxxx> >> > To: <techassist@xxxxxxxxxxxxx> >> > Subject: [TechAssist] Re: VCR RCA VR506 >> timing >> > Date sent: Sun, 13 Jan 2002 11:34:23 -0700 >> > Send reply to: techassist@xxxxxxxxxxxxx >> > >> > > >> > > That is cool. Anyone have any ideas of the part >> number? >> > > >> > > Good luck, God Bless >> > > Bill McFarland >> > > DMC Electronics >> > > >> > > ----- Original Message ----- >> > > From: Jack <lightwizard_2000@xxxxxxxxx> >> > > To: <techassist@xxxxxxxxxxxxx> >> > > Sent: Saturday, January 12, 2002 5:27 PM >> > > Subject: [TechAssist] Re: VCR RCA VR506 timing >> > > >> > > >> > > > >> > > > There is a "kit" for that problem... Comes >> with a >> > > > black gear that is taller than the white one. >> > > > Therefore It doesn't get chewed up. Ask your >> TCE dist. >> > > > for it. >> > > > >> > > > Jack >> > > > >> > > > --- Bill McFarland >> <billmcfarland@xxxxxxxxxxxxxx> >> > > > wrote: >> > > > > >> > > > > If this is the unit I think it is. >> > > > > >> > > > > there is a small plastic "tit" that breaks >> off right >> > > > > by the loading gear. It >> > > > > allows the carriage assy to go out of time >> with the >> > > > > bottom half of the unit. >> > > > > >> > > > > Anyway, I just take a small camcorder size >> screw, >> > > > > melt a hole in the plastic >> > > > > with my Iron. Then tap the screw into the >> plastic. >> > > > > works great. >> > > > > >> > > > > If you need more info. Let me know. >> > > > > >> > > > > Good luck, God Bless, Happy Holidays >> > > > > Bill McFarland >> > > > > DMC Electronics >> > > > > Salt Lake City, Utah >> > > > > >> > > > > >> > > > > ----- Original Message ----- >> > > > > From: Chaz <chaz@xxxxxxxxxxx> >> > > > > To: <techassist@xxxxxxxxxxxxx> >> > > > > Sent: Saturday, January 12, 2002 11:39 AM >> > > > > Subject: [TechAssist] Re: VCR RCA VR506 >> timing >> > > > > >> > > > > >> > > > > > >> > > > > > You mentioned that the cassette loads okay >> (if I >> > > > > understood correctly) >> > > > > > with the carriage removed from the VCR >> but, only >> > > > > half when in the VCR. >> > > > > > Two things come to my mind. >> > > > > > >> > > > > > I suspect that if the problem only happens >> while >> > > > > in the VCR, the carriage >> > > > > > is not seated fully into the base of the >> VCR. >> > > > > Check for slots in the base >> > > > > > where the carriage would attach too as >> well as any >> > > > > bent "tangs" on the >> > > > > > carriage keeping it from properly seating. >> > > > > > >> > > > > > The other possibility is that the carriage >> itself >> > > > > is out of alignment just >> > > > > > enough that when the auto-load sequence >> occurs, >> > > > > one side of the carriage >> > > > > > is activating first. Sometimes with the >> carriage >> > > > > out and EJECT is >> > > > > > pressed, the carriage will unload to its >> correct >> > > > > full unload position. >> > > > > > Then afterwards, placing the carriage >> back, the >> > > > > unit might operate >> > > > > > correctly (in my case, this is usually >> slim). >> > > > > > >> > > > > > In other cases, I have seen bad "cassette >> down" >> > > > > switches bad (front of VCR >> > > > > > underside of carriage) or somehow got >> broken >> > > > > because of the customer >> > > > > > attempting to unscrew, remove, and replace >> > > > > everything back. >> > > > > > >> > > > > > Chaz >> > > > > > --- >> > > > > > >> > > > > > >> > > > > > From: MagLfixIt4ya@xxxxxxx >> > > > > > Date sent: Fri, 11 Jan 2002 10:17:31 >> EST >> > > > > > Subject: [TechAssist] VCR RCA VR506 >> timing >> > > > > > To: techassist@xxxxxxxxxxxxx, >> > > > > MagLfixTvNyc@xxxxxxx >> > > > > > Send reply to: techassist@xxxxxxxxxxxxx >> > > > > > >> > > > > > > >> > > > > > > Hello Techs, when this vcr came in it >> had a worn >> > > > > link gear that operates >> > > > > the >> > > > > > > cassette housing, after replacing it >> still will >> > > > > not except a cassette, >> > > > > it >> > > > > > > takes the cassette in about half way and >> spits >> > > > > it right back out, I have >> > > > > > > checked the timing in the "under >> chassis" such >> > > > > as the cam gear and slide >> > > > > > > plate and the timing in the "above >> chassis" >> > > > > assembly looks good also, >> > > > > the >> > > > > > > timing also looks good in the cassette >> housing. >> > > > > > > If I take the housing out the carriage >> loads and >> > > > > unloads a cassette >> > > > > manually, >> > > > > > > and the main mechanism loads and unloads >> with no >> > > > > problem, what am I >> > > > > missing? >> > > > > > > I don't think this is a mode switch >> problem >> > > > > because as the cassette goes >> > > > > in >> > > > > > > it seems to jam before it kicks back >> out, anyone >> > > > > have any idea's? Any >> > > > > help is >> > > > > > > appreciated. >> > > > > > > Don from Affordable Electronics >> > > > > > > 153 Garfield Pl. >> > > > > > > Brooklyn NY 11215 >> > > > > > > 718-788-0384 >> > > > > > > 718-788-2326 (fax) >> > > > > > > >> ------------------------------------------ >> > > > > > > Help make your TechAssist database >> better! >> > > > > > > Submit your fixes here: >> > > > > http://circuitwork.com/techassist/tip/#tips >> > > > > > > >> ------------------------------------------ >> > > > > > > To UNSUBSCRIBE your email address, click >> here: >> > > > > > > >> > > > > >> > > > >> >mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe >> > > > > > > Or send a BLANK email with unsubscribe >> in the >> > > > > > > SUBJECT field to the address above. >> > > > > > > >> > > > > > > >> > > > > > > >> > > > > > > >> > > > > > >> > > > > > >> > > > > > ------------------------------------------ >> > > > > > Help make your TechAssist database better! >> > > > > > Submit your fixes here: >> > > > > http://circuitwork.com/techassist/tip/#tips >> > > > > > ------------------------------------------ >> > > > > > To UNSUBSCRIBE your email address, click >> here: >> > > > > > >> > > > > >> > > > >> >mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe >> > > > > > Or send a BLANK email with unsubscribe in >> the >> > > > > > SUBJECT field to the address above. >> > > > > > >> > > > > >> > > > > ------------------------------------------ >> > > > > Help make your TechAssist database better! >> > > > > Submit your fixes here: >> > > > > http://circuitwork.com/techassist/tip/#tips >> > > > > ------------------------------------------ >> > > > > To UNSUBSCRIBE your email address, click >> here: >> > > > > >> > > > >> >mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe >> > > > > Or send a BLANK email with unsubscribe in >> the >> > > > > SUBJECT field to the address above. >> > > > > >> > > > >> > > > >> > > > ===== >> > > > Electronic Wizards >> > > > 535 North Woodlawn >> > > > Suite 350 >> > > > Wichita, Kansas 67208 >> > > > 316-686-8324 >> > > > 316-686-4815 fax >> > > > >> > > > >> __________________________________________________ >> > > > Do You Yahoo!? >> > > > Send FREE video emails in Yahoo! Mail! >> > > > http://promo.yahoo.com/videomail/ >> > > > ------------------------------------------ >> > > > Help make your TechAssist database better! >> > > > Submit your fixes here: >> http://circuitwork.com/techassist/tip/#tips >> > > > ------------------------------------------ >> > > > To UNSUBSCRIBE your email address, click here: >> > > > >> >mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe >> > > > Or send a BLANK email with unsubscribe in the >> > > > SUBJECT field to the address above. >> > > > >> > > >> > > ------------------------------------------ >> > > Help make your TechAssist database better! >> > > Submit your fixes here: >> http://circuitwork.com/techassist/tip/#tips >> > > ------------------------------------------ >> > > To UNSUBSCRIBE your email address, click here: >> > > >> >mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe >> > > Or send a BLANK email with unsubscribe in the >> > > SUBJECT field to the address above. >> > > >> > > >> > > >> > > >> > >> > >> > ------------------------------------------ >> > Help make your TechAssist database better! >> > Submit your fixes here: >> http://circuitwork.com/techassist/tip/#tips >> > ------------------------------------------ >> > To UNSUBSCRIBE your email address, click here: >> > >> >mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe >> > Or send a BLANK email with unsubscribe in the >> > SUBJECT field to the address above. >> > >> >> ------------------------------------------ >> Help make your TechAssist database better! >> Submit your fixes here: >> http://circuitwork.com/techassist/tip/#tips >> ------------------------------------------ >> To UNSUBSCRIBE your email address, click here: >> >mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe >> Or send a BLANK email with unsubscribe in the >> SUBJECT field to the address above. >> > > >===== >Electronic Wizards >535 North Woodlawn >Suite 350 >Wichita, Kansas 67208 >316-686-8324 >316-686-4815 fax > >__________________________________________________ >Do You Yahoo!? >Send FREE video emails in Yahoo! Mail! >http://promo.yahoo.com/videomail/ >------------------------------------------ >Make your TechAssist database better! >Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ >------------------------------------------ >To UNSUBSCRIBE your email address, click here: >mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe >Or send a BLANK email with unsubscribe in the >SUBJECT field to the address above. > > ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.