[TechAssist] Re: VCR RCA VR506 timing
- From: Jack <lightwizard_2000@xxxxxxxxx>
- To: techassist@xxxxxxxxxxxxx
- Date: Sun, 13 Jan 2002 16:31:50 -0800 (PST)
In my earlier post I did not meant the side plate kit,
I meant the new and improved loading gear that moves
the carriage assy. The new one is black and is taller
so the teeth on the gear no longer fail.
Jack
--- Jeff Dougherty <jeff@xxxxxxxxxxxxxxxxxx> wrote:
>
> Yes, that is for the whole side plate.
>
> Jeff
> FAX 1-413-280-0677
> Intrepid Video & Electronics
> 501 Luther Rd
> Harrisburg, PA 17111
> 717-909-8844
> mailto:Jeff@xxxxxxxxxxxxxxxxxx
> www.9-11-2001tragedy.com
> www.intrepid-video.com www.tech-repair.net
> www.thetoolcaddy.com
>
>
> ----- Original Message -----
> From: "Chaz" <chaz@xxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Sunday, January 13, 2002 1:37 PM
> Subject: [TechAssist] Re: VCR RCA VR506 timing
>
>
> >
> > I believe Jeff Dougherty said it was #221066
> >
> > Chaz
> > ---
> >
> >
> > From: "Bill McFarland"
> <billmcfarland@xxxxxxxxxxxxxx>
> > To: <techassist@xxxxxxxxxxxxx>
> > Subject: [TechAssist] Re: VCR RCA VR506
> timing
> > Date sent: Sun, 13 Jan 2002 11:34:23 -0700
> > Send reply to: techassist@xxxxxxxxxxxxx
> >
> > >
> > > That is cool. Anyone have any ideas of the part
> number?
> > >
> > > Good luck, God Bless
> > > Bill McFarland
> > > DMC Electronics
> > >
> > > ----- Original Message -----
> > > From: Jack <lightwizard_2000@xxxxxxxxx>
> > > To: <techassist@xxxxxxxxxxxxx>
> > > Sent: Saturday, January 12, 2002 5:27 PM
> > > Subject: [TechAssist] Re: VCR RCA VR506 timing
> > >
> > >
> > > >
> > > > There is a "kit" for that problem... Comes
> with a
> > > > black gear that is taller than the white one.
> > > > Therefore It doesn't get chewed up. Ask your
> TCE dist.
> > > > for it.
> > > >
> > > > Jack
> > > >
> > > > --- Bill McFarland
> <billmcfarland@xxxxxxxxxxxxxx>
> > > > wrote:
> > > > >
> > > > > If this is the unit I think it is.
> > > > >
> > > > > there is a small plastic "tit" that breaks
> off right
> > > > > by the loading gear. It
> > > > > allows the carriage assy to go out of time
> with the
> > > > > bottom half of the unit.
> > > > >
> > > > > Anyway, I just take a small camcorder size
> screw,
> > > > > melt a hole in the plastic
> > > > > with my Iron. Then tap the screw into the
> plastic.
> > > > > works great.
> > > > >
> > > > > If you need more info. Let me know.
> > > > >
> > > > > Good luck, God Bless, Happy Holidays
> > > > > Bill McFarland
> > > > > DMC Electronics
> > > > > Salt Lake City, Utah
> > > > >
> > > > >
> > > > > ----- Original Message -----
> > > > > From: Chaz <chaz@xxxxxxxxxxx>
> > > > > To: <techassist@xxxxxxxxxxxxx>
> > > > > Sent: Saturday, January 12, 2002 11:39 AM
> > > > > Subject: [TechAssist] Re: VCR RCA VR506
> timing
> > > > >
> > > > >
> > > > > >
> > > > > > You mentioned that the cassette loads okay
> (if I
> > > > > understood correctly)
> > > > > > with the carriage removed from the VCR
> but, only
> > > > > half when in the VCR.
> > > > > > Two things come to my mind.
> > > > > >
> > > > > > I suspect that if the problem only happens
> while
> > > > > in the VCR, the carriage
> > > > > > is not seated fully into the base of the
> VCR.
> > > > > Check for slots in the base
> > > > > > where the carriage would attach too as
> well as any
> > > > > bent "tangs" on the
> > > > > > carriage keeping it from properly seating.
> > > > > >
> > > > > > The other possibility is that the carriage
> itself
> > > > > is out of alignment just
> > > > > > enough that when the auto-load sequence
> occurs,
> > > > > one side of the carriage
> > > > > > is activating first. Sometimes with the
> carriage
> > > > > out and EJECT is
> > > > > > pressed, the carriage will unload to its
> correct
> > > > > full unload position.
> > > > > > Then afterwards, placing the carriage
> back, the
> > > > > unit might operate
> > > > > > correctly (in my case, this is usually
> slim).
> > > > > >
> > > > > > In other cases, I have seen bad "cassette
> down"
> > > > > switches bad (front of VCR
> > > > > > underside of carriage) or somehow got
> broken
> > > > > because of the customer
> > > > > > attempting to unscrew, remove, and replace
> > > > > everything back.
> > > > > >
> > > > > > Chaz
> > > > > > ---
> > > > > >
> > > > > >
> > > > > > From: MagLfixIt4ya@xxxxxxx
> > > > > > Date sent: Fri, 11 Jan 2002 10:17:31
> EST
> > > > > > Subject: [TechAssist] VCR RCA VR506
> timing
> > > > > > To: techassist@xxxxxxxxxxxxx,
> > > > > MagLfixTvNyc@xxxxxxx
> > > > > > Send reply to: techassist@xxxxxxxxxxxxx
> > > > > >
> > > > > > >
> > > > > > > Hello Techs, when this vcr came in it
> had a worn
> > > > > link gear that operates
> > > > > the
> > > > > > > cassette housing, after replacing it
> still will
> > > > > not except a cassette,
> > > > > it
> > > > > > > takes the cassette in about half way and
> spits
> > > > > it right back out, I have
> > > > > > > checked the timing in the "under
> chassis" such
> > > > > as the cam gear and slide
> > > > > > > plate and the timing in the "above
> chassis"
> > > > > assembly looks good also,
> > > > > the
> > > > > > > timing also looks good in the cassette
> housing.
> > > > > > > If I take the housing out the carriage
> loads and
> > > > > unloads a cassette
> > > > > manually,
> > > > > > > and the main mechanism loads and unloads
> with no
> > > > > problem, what am I
> > > > > missing?
> > > > > > > I don't think this is a mode switch
> problem
> > > > > because as the cassette goes
> > > > > in
> > > > > > > it seems to jam before it kicks back
> out, anyone
> > > > > have any idea's? Any
> > > > > help is
> > > > > > > appreciated.
> > > > > > > Don from Affordable Electronics
> > > > > > > 153 Garfield Pl.
> > > > > > > Brooklyn NY 11215
> > > > > > > 718-788-0384
> > > > > > > 718-788-2326 (fax)
> > > > > > >
> ------------------------------------------
> > > > > > > Help make your TechAssist database
> better!
> > > > > > > Submit your fixes here:
> > > > > http://circuitwork.com/techassist/tip/#tips
> > > > > > >
> ------------------------------------------
> > > > > > > To UNSUBSCRIBE your email address, click
> here:
> > > > > > >
> > > > >
> > > >
>
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > > > > > > Or send a BLANK email with unsubscribe
> in the
> > > > > > > SUBJECT field to the address above.
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > >
> > > > > >
> > > > > > ------------------------------------------
> > > > > > Help make your TechAssist database better!
> > > > > > Submit your fixes here:
> > > > > http://circuitwork.com/techassist/tip/#tips
> > > > > > ------------------------------------------
> > > > > > To UNSUBSCRIBE your email address, click
> here:
> > > > > >
> > > > >
> > > >
>
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > > > > > Or send a BLANK email with unsubscribe in
> the
> > > > > > SUBJECT field to the address above.
> > > > > >
> > > > >
> > > > > ------------------------------------------
> > > > > Help make your TechAssist database better!
> > > > > Submit your fixes here:
> > > > > http://circuitwork.com/techassist/tip/#tips
> > > > > ------------------------------------------
> > > > > To UNSUBSCRIBE your email address, click
> here:
> > > > >
> > > >
>
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > > > > Or send a BLANK email with unsubscribe in
> the
> > > > > SUBJECT field to the address above.
> > > > >
> > > >
> > > >
> > > > =====
> > > > Electronic Wizards
> > > > 535 North Woodlawn
> > > > Suite 350
> > > > Wichita, Kansas 67208
> > > > 316-686-8324
> > > > 316-686-4815 fax
> > > >
> > > >
> __________________________________________________
> > > > Do You Yahoo!?
> > > > Send FREE video emails in Yahoo! Mail!
> > > > http://promo.yahoo.com/videomail/
> > > > ------------------------------------------
> > > > Help make your TechAssist database better!
> > > > Submit your fixes here:
> http://circuitwork.com/techassist/tip/#tips
> > > > ------------------------------------------
> > > > To UNSUBSCRIBE your email address, click here:
> > > >
>
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > > > Or send a BLANK email with unsubscribe in the
> > > > SUBJECT field to the address above.
> > > >
> > >
> > > ------------------------------------------
> > > Help make your TechAssist database better!
> > > Submit your fixes here:
> http://circuitwork.com/techassist/tip/#tips
> > > ------------------------------------------
> > > To UNSUBSCRIBE your email address, click here:
> > >
>
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > > Or send a BLANK email with unsubscribe in the
> > > SUBJECT field to the address above.
> > >
> > >
> > >
> > >
> >
> >
> > ------------------------------------------
> > Help make your TechAssist database better!
> > Submit your fixes here:
> http://circuitwork.com/techassist/tip/#tips
> > ------------------------------------------
> > To UNSUBSCRIBE your email address, click here:
> >
>
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > Or send a BLANK email with unsubscribe in the
> > SUBJECT field to the address above.
> >
>
> ------------------------------------------
> Help make your TechAssist database better!
> Submit your fixes here:
> http://circuitwork.com/techassist/tip/#tips
> ------------------------------------------
> To UNSUBSCRIBE your email address, click here:
>
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> Or send a BLANK email with unsubscribe in the
> SUBJECT field to the address above.
>
=====
Electronic Wizards
535 North Woodlawn
Suite 350
Wichita, Kansas 67208
316-686-8324
316-686-4815 fax
__________________________________________________
Do You Yahoo!?
Send FREE video emails in Yahoo! Mail!
http://promo.yahoo.com/videomail/
------------------------------------------
Make your TechAssist database better!
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.
Other related posts:
