[TechAssist] UPD.... PA Zenith Z25X22S. RX3209...Chassis swapped.
- From: "Intrepid Video Support" <support@xxxxxxxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Thu, 28 Oct 2004 15:16:40 -0400
Thanks to Kevin Harris..and Bob W for sending me the parts list, I just found
out someone pulled a chassis
swap on me and this one has the 9-1558.
I did confirm the resistor is correct, but the vertical output still blows.
Jeff
--
Intrepid Video TV/VCR Repair
263 S Front St, Steelton PA 17113
717-939-7708; (F) 717-564-4952
www.intrepid-video.com www.tech-repair.net
----- Original Message -----
From: "Intrepid Video Support" <support@xxxxxxxxxxxxxxxxxx>
To: "Techassist" <techassist@xxxxxxxxxxxxx>
Sent: Thursday, October 28, 2004 2:27 PM
Subject: [TechAssist] PA Zenith Z25X22S. RX3209
No schematic.
Set came in with blown vertical LA7833 and RX3209 open.
Resistor looked like it was a 1 ohm..used a one ohm and vertical IC blew
again..though not the same way as
the original.(By taking ohms reading) and the resistor was OK
I'm beginning to think maybe this resistor should have been the common 2.2 ohm.
First badn could be a
brown or red, second one is defintely black..
Can someone verify for me? I also replaced HIGH ESR C2100. All caps and feed
diode check ok.
Thank you.
Jeff
--
Intrepid Video TV/VCR Repair
263 S Front St, Steelton PA 17113
717-939-7708; (F) 717-564-4952
www.intrepid-video.com www.tech-repair.net
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
