It's a 1 ohm alright...did you change C2100..(47ufd/25volts)? -Ed- Ed Gaidies Tel-Tek Electronics Ontario-Canada teltek3@xxxxxxxxxxxx teltek@xxxxxxxxx Intrepid Video Support wrote: > > No schematic. > Set came in with blown vertical LA7833 and RX3209 open. > Resistor looked like it was a 1 ohm..used a one ohm and vertical IC blew > again..though not the same way as > the original.(By taking ohms reading) and the resistor was OK > I'm beginning to think maybe this resistor should have been the common 2.2 > ohm. First badn could be a > brown or red, second one is defintely black.. > Can someone verify for me? I also replaced HIGH ESR C2100. All caps and feed > diode check ok. > Thank you. > Jeff > -- > Intrepid Video TV/VCR Repair > 263 S Front St, Steelton PA 17113 > 717-939-7708; (F) 717-564-4952 > www.intrepid-video.com www.tech-repair.net > > > ----------------------------------------------------------------------------- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/