[TechAssist] Re: Sony VCR SLV-360, cassette goes in and come right back out
- From: Gary McCartney <gary@xxxxxxxxxxx>
- To: techassist@xxxxxxxxxxxxx
- Date: Tue, 03 Dec 2002 15:29:04 -0500
Ed, thanks. I should have added a note in my message that I also slid
the slide plate by hand and the guide posts loaded up all the way
without any kind of binding. It really seems as the large black loading
gear is not able to rotate far enough to engage the slide plate teeth.
The black gear can't turn as far as I think it should because the
flanges on the FL loading gear I replaced hit up against it and prevent
further rotation. I have to be doing something wrong but what?
Gary McCartney
McCartney Electronics
7134 Fife Rd, RR 7
Guelph Ontario Canada N1H 6J4
Fax: (519)821-1530
email: gary (at) number63.ca
Edward Gaidies wrote:
>
> Sounds like linkage to the t/u and supply guides is out of allignment. Not
> sure though, since I would never get approval from customer for this type of
> repair....Sony...or not. Also I thought... either you or I.. had one of
> these gears worn in another Sony, and found out later that this gear was not
> really the problem, but something else.
>
> -Ed-
>
> -Ed-
> ----- Original Message -----
> From: "Gary McCartney" <gary@xxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Tuesday, December 03, 2002 3:01 PM
> Subject: [TechAssist] Sony VCR SLV-360, cassette goes in and come right back
> out
>
> >
> > This Sony VCR model SLV360 came into the shop with a cassette stuck
> > inside it. I had to remove the carriage in order to free the cassette. I
> > noticed that the FL-loading gear # 3-958-156-03 had some chewed teeth so
> > I ordered a new one. Now I have it all installed back together and the
> > cassette will go into the machine, all the way down to it's resting
> > position but instead of the mechanism pulling the tape out of the
> > cassette and loading it, the cassette just reverses and ejects on me. I
> > have cleaned the mode switch. Also checked the alignment of the loading
> > gears, which look ok to me although I don't have a manual to do this by.
> > for a photo of my alignment, clink on link:
> >
> >
> > http://www.number63.ca/gears.jpg
> >
> >
> > I cleaned the grease off the slide plate "rack" gear teeth and they look
> > as I believe they should. The first tooth is only half as high as the
> > rest but it looks like it was manufacturerd that way, not as if it looks
> > broken.
> >
> >
> > To see picture of teeth on slide plate, click on link:
> >
> > http://www.number63.ca/deck.jpg
> >
> >
> > I removed the loading motor so I could spin the gears manually and after
> > the cassette loading is complete, the gears lock up and won't allow the
> > tape loading procedure to start. It appears as though it's the fault of
> > the FL loading gear which I replaced because as the large black gear
> > rotates, the FL gear's flanges hit the teeth on the black gear and
> > prevent any further rotation. Still, I'm sure the FL gear is in proper
> > position.
> >
> >
> > I'm stuck on this one, any help appreciated.
> > --
> >
> >
> >
> >
> > Gary McCartney
> >
> > McCartney Electronics
> > 7134 Fife Rd, RR 7
> > Guelph Ontario Canada N1H 6J4
> > Fax: (519)821-1530
> > email: gary (at) number63.ca
> >
> > ------------------------------------------
> > To REMOVE your email address, click here:
> > http://www.tech-assist.org/unsubb.html
> > To CHANGE your email address, click here:
> > http://www.techassist.net/forms/change.html
> > ------------------------------------------
> > ***NEW*** Tips Added Instantly!!!***
> > Submit Repair Tips here:
> > http://www.tech-assist.org/secure/tip/
>
> ------------------------------------------
> To REMOVE your email address, click here:
> http://www.tech-assist.org/unsubb.html
> To CHANGE your email address, click here:
> http://www.techassist.net/forms/change.html
> ------------------------------------------
> ***NEW*** Tips Added Instantly!!!***
> Submit Repair Tips here:
> http://www.tech-assist.org/secure/tip/
--
Gary McCartney
McCartney Electronics
7134 Fife Rd, RR 7
Guelph Ontario Canada N1H 6J4
Fax: (519)821-1530
email: gary (at) number63.ca
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
http://www.techassist.net/forms/change.html
------------------------------------------
***NEW*** Tips Added Instantly!!!***
Submit Repair Tips here:
http://www.tech-assist.org/secure/tip/
Other related posts:
