Make sure to solder the metal can transformers in the IF module, plus the edge connector pins where they solder to the pcb. (I cover all the pins with masking tape so they won't move out of place during soldering) and solder the tuner also. Gary McCartney McCartney Electronics 7134 Fife Rd, RR 7 Guelph Ontario Canada N1H 6J4 Fax: (519)821-1530 email: number63 (at) inetsonic.com matt sherer wrote: > > Sony TV > Model: KV2780R > Tuning(picture and sound) is in and out. Pulled the IF pack and resoldered > the grounds and other various connections(think I did them all). No help. > Anyone have any info on this set? TIA! > > Gear Guy > Electronic repair > A/V systems design, maintenance and installation > AMX programming > Matt Sherer, CET > 1411 Honeysuckle Lane > Champaign, IL 61821 > (217)356-9479 > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.tech-assist.org/change.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ -- ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.tech-assist.org/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/