Hello Gary, Thanx for the reply, I have a good sub on the way. Thanx, Scott Beebe Ohm Electronics Inc. 609 W. Clinton St. Ithaca NY 14850 Voice: (607) 273-8406 Fax: (607) 273-8743 WWW.OhmElectronicsInc.com mailto:Scott@xxxxxxxxxxxxxxxxxxxxx Monday, June 28, 2004, 12:09:27 PM, you wrote: Gary> I had an RCA CTC203 with a 2SC5148 which I didn't have in stock so I Gary> used a BUH517. Ran very cool. Don't know how it would react in a Sony Gary> though. Gary> Gary McCartney Gary> McCartney Electronics Gary> Guelph Ontario Canada Gary> Est. 1984 Gary> email: gary (at) number63.ca Gary> Scott Beebe wrote: >> Hello everyone, >> >> I am working on a Sony KV-35v36, and it had a shorted H-out and >> power supply x-sistors. I usually change out the 2sc4927 with a >> 2sd1881 or NTE2353 (8A vs 10A, both with damper) because they run >> cooler. This set uses a 2sc5148 (no damper, 8A) I was wondering if >> there is a good 10A sub to use besides the NTE2354, Such a big set >> I don't feel like lugging it around more then I have to. And I >> would like to use a "real" x-sistor, not the NTE. But I can if need >> be. TIA >> >> >> >> >> Thanx, >> >> Scott Beebe >> Ohm Electronics Inc. >> 609 W. Clinton St. >> Ithaca NY 14850 >> Voice: (607) 273-8406 >> Fax: (607) 273-8743 >> WWW.OhmElectronicsInc.com >> mailto:Scott@xxxxxxxxxxxxxxxxxxxxx >> >> >> ----------------------------------------------------------------------------- >> Lost Password: >> http://www.tech-assist.org and select "Login Problems?". >> Email Archives: >> //www.freelists.org/archives/techassist/ >> Gary> ----------------------------------------------------------------------------- Gary> Lost Password: Gary> http://www.tech-assist.org and select "Login Problems?". Gary> Email Archives: Gary> //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/