I had an RCA CTC203 with a 2SC5148 which I didn't have in stock so I used a BUH517. Ran very cool. Don't know how it would react in a Sony though. Gary McCartney McCartney Electronics Guelph Ontario Canada Est. 1984 email: gary (at) number63.ca Scott Beebe wrote: > Hello everyone, > > I am working on a Sony KV-35v36, and it had a shorted H-out and power supply > x-sistors. I usually change out the 2sc4927 with a 2sd1881 or NTE2353 (8A vs > 10A, both with damper) because they run cooler. This set uses a 2sc5148 (no > damper, 8A) I was wondering if there is a good 10A sub to use besides the > NTE2354, Such a big set I don't feel like lugging it around more then I have > to. And I would like to use a "real" x-sistor, not the NTE. But I can if need > be. TIA > > > > > Thanx, > > Scott Beebe > Ohm Electronics Inc. > 609 W. Clinton St. > Ithaca NY 14850 > Voice: (607) 273-8406 > Fax: (607) 273-8743 > WWW.OhmElectronicsInc.com > mailto:Scott@xxxxxxxxxxxxxxxxxxxxx > > > ----------------------------------------------------------------------------- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/