[TechAssist] Re: Sony HOT Subs

I use the 2SD1887 for the RCA CTC169 chassis and most everything that
doesn't require a internal damper.
It is 10 amps and crosses to NTE2354

Robert
tvservice@xxxxxxxxxxxxx
H & H Electronics Inc

----- Original Message ----- 
From: "Scott Beebe" <Scott@xxxxxxxxxxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Monday, June 28, 2004 10:27 AM
Subject: [TechAssist] Sony HOT Subs


> Hello everyone,
>
> I am working on a Sony KV-35v36, and it had a shorted H-out and power
supply x-sistors. I usually change out the 2sc4927 with a 2sd1881 or NTE2353
(8A vs 10A, both with damper) because they run cooler. This set uses a
2sc5148 (no damper, 8A) I was wondering if there is a good 10A sub to use
besides the NTE2354, Such a big set I don't feel like lugging it around more
then I have to. And I would like to use a "real" x-sistor, not the NTE. But
I can if need be. TIA
>
>
>
>
>  Thanx,
>
> Scott Beebe
> Ohm Electronics Inc.
> 609 W. Clinton St.
> Ithaca NY 14850
> Voice: (607) 273-8406
> Fax: (607) 273-8743
> WWW.OhmElectronicsInc.com
> mailto:Scott@xxxxxxxxxxxxxxxxxxxxx
>
>
> --------------------------------------------------------------------------
---
> Lost Password:
> http://www.tech-assist.org  and select "Login Problems?".
> Email Archives:
> http://www.freelists.org/archives/techassist/



-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org  and select "Login Problems?".
Email Archives:
http://www.freelists.org/archives/techassist/

Other related posts: