Its most likly the proscan board I have had one before. Phillip R Hull phil245@xxxxxxxxxxxxx FAX 517--569-3075 Professional Technicians only ----- Original Message ----- From: "Tony S" <tcselectronics@xxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, December 22, 2005 9:33 PM Subject: [TechAssist] Samsung projo HCN653W Herringbone in pix > Hi guys, > > We have a Samsung projo in that has a bad herringbone pattern that changes > in both intensity and pattern. this noise is seen on Svideo and ant input > but is barley there in component 480P.(could not check 1080I cuz customer > did not have any 1080I source). the blue screen that comes up when off > channel on ant input is also covered with the distortion as is the menu. > anyone see this before, I am thinking the pro scan bd but at $176 would like > to know if anyone else had this issue. One other note , the customer said > this set had this distortion out of the box but only slightly but over time > the distortion became worse. > > thanks, > > Tony Saracco > TCS ELECTRONICS > 406 Andra Ct. > Gilberts, IL 60136 > tcselectronics@xxxxxxxxx > > -------------------------------------------------------------------------- --- > This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm > Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Email Archives: //www.freelists.org/archives/techassist/ > > ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/