[TechAssist] Re: Rca DVD DRC220N need info update
- From: "al m" <ampm@xxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Tue, 10 Aug 2004 16:09:52 -0400
I found there is six volts on the motor from the driver. When I put 6V in
from power supply it is not enough to load the disc the motor stops. Now can
anyone tell me if the 6V is correct and I have a bad motor or the 6V is
wrong and I have a bad loading IC. # on IC LB1641 I don't have anything on
this IC. Thanks
Al Marquardt
ampm@xxxxxxx
Al Marquardt Electronic Repair
206 W Main
Girardville Pa. 17935
----- Original Message -----
From: "al m" <ampm@xxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Monday, August 09, 2004 11:10 AM
Subject: [TechAssist] Rca DVD DRC220N need info
> This unit doesn't load far enough to bring the laser up. I thought the
belt
> was slipping and replaced it. The motor only turn so long with or without
> the belt on so I guess it is timed. Can anyone give me the voltage for the
> motor or have a print of that circuit?
> Al Marquardt
> ampm@xxxxxxx
> Al Marquardt Electronic Repair
> 206 W Main
> Girardville Pa. 17935
>
>
>
> --------------------------------------------------------------------------
---
> Lost Password:
> http://www.tech-assist.org and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/
>
>
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
