Information on the IC: http://service.semic.sanyo.co.jp/semi/ds_pdf_e/LB1641.pdf David Lessard Alexandria, Ontario. Canada mr_fixit@xxxxxxxxxxxx -----Original Message----- From: techassist-bounce@xxxxxxxxxxxxx [mailto:techassist-bounce@xxxxxxxxxxxxx] On Behalf Of al m Sent: Tuesday, August 10, 2004 9:10 PM To: techassist@xxxxxxxxxxxxx Subject: [TechAssist] Re: Rca DVD DRC220N need info update I found there is six volts on the motor from the driver. When I put 6V in from power supply it is not enough to load the disc the motor stops. Now can anyone tell me if the 6V is correct and I have a bad motor or the 6V is wrong and I have a bad loading IC. # on IC LB1641 I don't have anything on this IC. Thanks Al Marquardt ampm@xxxxxxx Al Marquardt Electronic Repair 206 W Main Girardville Pa. 17935 ----- Original Message ----- From: "al m" <ampm@xxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Monday, August 09, 2004 11:10 AM Subject: [TechAssist] Rca DVD DRC220N need info > This unit doesn't load far enough to bring the laser up. I thought the belt > was slipping and replaced it. The motor only turn so long with or without > the belt on so I guess it is timed. Can anyone give me the voltage for the > motor or have a print of that circuit? > Al Marquardt > ampm@xxxxxxx > Al Marquardt Electronic Repair > 206 W Main > Girardville Pa. 17935 > > > > ------------------------------------------------------------------------ -- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > > ------------------------------------------------------------------------ ----- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/