if the gear timing is off or the mode switch is bad, the unit may go in this error mode. gary Gary Chambers Chambers T V Bradenton,Florida Since 1982 ----- Original Message ----- From: "Mike Barnett" <passthecash@xxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, October 09, 2001 5:51 PM Subject: [TechAssist] RCA VCR model# VR652 HF > > Have a RCA VCR model # vr652hf this unit powers up, head motor spins(but not > wide open)and stays running(this is not the normal head motor initialize) > LCD displays Eject then unit shuts down. > Disassembled and checked stator and upper cylinder connections on main board > and tape end censors. Changed The supply side because it ohmed out a littler > different than the takeup(about 1meg.) Center LED has power and works. > Does anyone have any notes on this problem? > Thanks in advance, > Mike > > > Get It Fixed At > Rochester Electronics > 630 West Ridge Rd. > Rochester, NY 14615 > 716.663.6870 > www.RochesterElectronicsRepair.com > > > > > > _______________________________________________________ > Send a cool gift with your E-Card > http://www.bluemountain.com/giftcenter/ > > > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. > Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.