Hi Techs, On plug-in I can hear the SMPS fire up, I can hear the HV start but then shut-down occurs, no horizontal drive, nothing but the standby voltages. Turning up the screen level shows no retrace lines. I'm thinking maybe the x-ray protection is kicking in but the +B never exceeds 130VDC before shut-down. I've checked the horizontal driver transformer and L401 coil for cold solder, it's OK. Something else is shutting down the TV. Is there a way of disabling the x-ray protection circuit for test purposes? Thanks in advance techs. David Lessard Alexandria, Ontario. Canada mr_fixit@xxxxxxxxxxxx ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/