[TechAssist] Re: Pioneer SD-P5181 convergence
- From: larry <schntv@xxxxxxxxxxxx>
- To: techassist@xxxxxxxxxxxxx
- Date: Tue, 02 Nov 2004 16:00:38 -0500
Well, the IC didnt fix it.
so now i suspect ic3006, PM0002b, not exactly a generic #, is it.
i sure could use a schematic. i hate to blindly start changing
every IC in the circuit.
dont seem to be many Pioneer schematics floating around the net.
Larry
Phil Bader wrote:
> Standard procedure here:
> Replace the STK convergence IC's. Use OEM's Pay the money. May not need
> but a touch up afterwards. That's why I like the OEMs.
> ESR all lytics on the conv. board, ohm all lo-ohm resistors, resolder
> all connectors and suspicious solder. Pioneer is famous for solder.,
> install the chips and see...
> Phil Bader
>
> larry wrote:
>
>
>>95 model, one convergence IC.
>>cant converge blue right and left.
>>not bowed but whole blue is sat over 1 inch and customer or
>>service menu wont move it either way.
>>good up and down.
>>red goes all 4 directions fine.
>>i doubt this is the convergence IC.
>>what you all think???
>>Larry
>>
>>
>>
>>
>
>
--
Schneider TV & Electronic Inc.
5415 N. Wooster ave.
Dover, Ohio 44622 www.geocities.com/schntv2000/
330-343-0768 FCC. first class & Extra class K8WLY
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
