On Fri, 22 Nov 2002, "LeRoy Westlund" wrote: >I think you still have a vertical deflection problem. have you looked at the waveforms out of the vertical IC? >=20 >=20 > Bob, > I have installed a socket, and with the original eeprom > back in set, the > problem remains. I think it's stricktly a NO video > problem. Sound is OK. >=20 > Thanks, > LLW >=20 > LeRoy Westlund > Westlund TV & Electronics " It's such a pretty > world > 93 North Main=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20= =20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20 > today !.... > Centerfield, UT 84622-0087 Look at the > Sunshine. " > Ph./Fax 435-528-3822=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20= =20=20=20=20=20=20=20=20=20=20=20=20=20 :-) > mailto:LLW@xxxxxxxxxx >=20 > -----Original Message----- > From: Gemini Computer & TV <geminitv@xxxxxxxxxxxxxxxx> > To: techassist@xxxxxxxxxxxxx <techassist@xxxxxxxxxxxxx> > Date: Friday, November 22, 2002 5:00 AM > Subject: [TechAssist] Re: Philips / Magnavox TS2744C103 > Chassis # 27B8 No > Video, no OSD, Sound is OK. >=20 >=20 > > > >Leroy, > >Install the original EEPROM. I have had replacements > that were blank. I > >always install a socket so I can remove it in the > future without > resoldering > >it. > > > >Bob Waterman, CET=AE #RI-28 > >Master Technician License #9109 > >Service Manager > >Gemini Computer, TV, & Security Alarms > >(508)695-7302 > >(508)695-7769 FAX > >geminitv@xxxxxxxxxxxxxxxx > >geminitv@xxxxxxx > > > >----- Original Message ----- > >From: "LeRoy Westlund" <llw@xxxxxxxxxx> > >To: <techassist@xxxxxxxxxxxxx> > >Sent: Thursday, November 21, 2002 9:26 PM > >Subject: [TechAssist] Re: Philips / Magnavox > TS2744C103 Chassis # 27B8 No > >Video, no OSD, Sound is OK. > > > > > >> > >> Thanks Bob,...but, I have saved that post from last > time. > >> Already checked everything suggested. (More then > once). > >> I need some NEW suggestions on this one. > >> I have the factory remote,...but, it won't reset the > eeprom. > >> > >> Regards, > >> LLW > >> > >> LeRoy Westlund > >> Westlund TV & Electronics " It's such a > pretty world > >> 93 North Main=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20= =20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20 =20 > today !.... > >> Centerfield, UT 84622-0087 Look at the > Sunshine. " > >> Ph./Fax 435-528-3822=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20= =20=20=20=20=20=20=20=20=20=20=20=20=20=20 > :-) > >> mailto:LLW@xxxxxxxxxx > >> > >> -----Original Message----- > >> From: Gemini Computer & TV > <geminitv@xxxxxxxxxxxxxxxx> > >> To: techassist@xxxxxxxxxxxxx > <techassist@xxxxxxxxxxxxx> > >> Date: Thursday, November 21, 2002 4:22 PM > >> Subject: [TechAssist] Re: Philips / Magnavox > TS2744C103 Chassis # 27B8 No > >> Video, no OSD, Sound is OK. > >> > >> > >> > > >> >Leroy, > >> >See if any of these apply: > >> > > >> >Symptom: Dim raster with faint colored bars from > top to bottom. No > >> response > >> >to changes of video, no menu or graphics on the > screen. > >> >Cause: The beams in the CRT are deflected into the > CRT neck and scatter > >at > >> >random across the screen. This is caused by either > a loss of Minus 13.5 > >> >volts to IC500 (vertical out) or IC500 itself. > >> >Cure: Check and replace as needed; R420, D409, > C419, IC500. > >> > > >> >---------------------------------------------------- > >> > > >> >Symptom: High Voltage (EHT) remains but there is > no: > >> >OSD - Menu > >> >Video - Raster > >> >Sound > >> >There may be a faint line across the top of the CRT. > >> >Cause: Information in the EEPROM (IC346) is > incorrect. This results in > >> >deadlock of the BIMOS Signal Processor. Caused in > one instance when > >> >Register 66 on Service Page A was adjusted to FF > and stored. > >> >Cure: If in the Service Mode exit by pressing 9, > then + (volume up). > >The > >> >set will shut off. Power on and enter the Service > Mode by > 06-25-95-MENU. > >> >Press A/CH (Surf). ROM defaults will be written to > the EEPROM and > normal > >> >operation will come back. > >> >Note: At this point all items in the Service Mode > will have to adjusted > >> for > >> >proper operation. > >> > > >> > > >> >Bob Waterman, CET=AE #RI-28 > >> >Master Technician License #9109 > >> >Service Manager > >> >Gemini Computer, TV, & Security Alarms > >> >(508)695-7302 > >> >(508)695-7769 FAX > >> >geminitv@xxxxxxxxxxxxxxxx > >> >geminitv@xxxxxxx > >> > > >> > > >> >----- Original Message ----- > >> >From: "LeRoy Westlund" <llw@xxxxxxxxxx> > >> >To: "TechAssist" <techassist@xxxxxxxxxxxxx> > >> >Sent: Thursday, November 21, 2002 12:04 PM > >> >Subject: [TechAssist] Philips / Magnavox TS2744C103 > Chassis # 27B8 No > >> Video, > >> >no OSD, Sound is OK. > >> > > >> > > >> >> > >> >> Hi members, > >> >> I have fixed 2 or 3 of these sets for the > traditional Vertical > >problems. > >> >> This one is giving me nightmares. > >> >> > >> >> After replacing IC500, D409, and R420, my > vertical seems to be > >OK,...but, > >> >> now I have a dark screen, with NO video or OSD. > There is a white line > >> >across > >> >> the top, about 1/2 inch thick. If I turn up my > screen control, it goes > >to > >> >> gray raster, with retrace lines. > >> >> > >> >> I have found about 20 fixes for this problem. > They all seem to be > >> >Vertical, > >> >> or IC500 related. Also,...some have been fixed by > replacing the Eprom. > >> >> I have rechecked my work in the vertical area.(NO > lifted traces.). > >> >> I have replaced the Eprom (NO change), but can't > access the service > >menu, > >> >> due to the NO OSD problem. I have replaced > IC271.(problem remains). > >> >> The voltages on IC500 are: > >> >> Pin # 1 - .4 volts > >> >> 2 - +12.5 > >> >> 3 - -10.5 > >> >> 4 - -12.5 > >> >> 5 - .2 > >> >> 6 - +13.5 > >> >> 7 - .4 > >> >> I have also had to replace R58 (20 ohms), and IC > 52 (TDA6106Q), on the > >> CRT > >> >> board.(For shutdown problems). > >> >> In other words,...This set had multiple > problems,...but, now,...there > >is > >> >> ONLY ONE problem left. Hate to junk it after > spending so much time and > >> >money > >> >> on it,...But,..it is now becoming a matter of > principal. I will not > >> >> rest,...until I find, and fix this problem ! > >> >> > >> >> Any help is appreciated, > >> >> LLW > >> >> > >> >> LeRoy Westlund > >> >> Westlund TV & Electronics " It's such a > pretty world > >> >> 93 North Main=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20= =20=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20 =20 > today !.... > >> >> Centerfield, UT 84622-0087 Look at the > Sunshine. " > >> >> Ph./Fax 435-528-3822=20=20=20=20=20=20=20=20=20=20=20=20=20=20=20= =20=20=20=20=20=20=20=20=20=20=20 =20 > :-) > >> >> mailto:LLW@xxxxxxxxxx > >> >> > >> >> > >> >> ------------------------------------------ > >> >> To REMOVE your email address, click here: > >> >> <a href=3D"http://mail.houseoftelevision.com/jump/http://www.tech-assist.org/u= nsubb.html">http://www.tech-assist.org/unsubb.html</a> > >> >> To CHANGE your email address, click here: > >> >> <a href=3D"http://mail.houseoftelevision.com/jump/http://www.techassist.net/fo= rms/change.html">http://www.techassist.net/forms/change.html</a> > >> >> ------------------------------------------ > >> >> ***NEW*** Tips Added Instantly!!!*** > >> >> Submit Repair Tips here: > >> >> <a href=3D"http://mail.houseoftelevision.com/jump/http://www.tech-assist.org/s= ecure/tip">http://www.tech-assist.org/secure/tip</a>/ > >> >> > >> > > >> >------------------------------------------ > >> >To REMOVE your email address, click here: > >> > <a href=3D"http://mail.houseoftelevision.com/jump/http://www.tech-assist.org/u= nsubb.html">http://www.tech-assist.org/unsubb.html</a> > >> >To CHANGE your email address, click here: > >> > <a href=3D"http://mail.houseoftelevision.com/jump/http://www.techassist.net/fo= rms/change.html">http://www.techassist.net/forms/change.html</a> > >> >------------------------------------------ > >> >***NEW*** Tips Added Instantly!!!*** > >> >Submit Repair Tips here: > >> ><a href=3D"http://mail.houseoftelevision.com/jump/http://www.tech-assist.org/s= ecure/tip">http://www.tech-assist.org/secure/tip</a>/ > >> > > >> > >> ------------------------------------------ > >> To REMOVE your email address, click here: > >> <a href=3D"http://mail.houseoftelevision.com/jump/http://www.tech-assist.org/u= nsubb.html">http://www.tech-assist.org/unsubb.html</a> > >> To CHANGE your email address, click here: > >> <a href=3D"http://mail.houseoftelevision.com/jump/http://www.techassist.net/fo= rms/change.html">http://www.techassist.net/forms/change.html</a> > >> ------------------------------------------ > >> ***NEW*** Tips Added Instantly!!!*** > >> Submit Repair Tips here: > >> <a href=3D"http://mail.houseoftelevision.com/jump/http://www.tech-assist.org/s= ecure/tip">http://www.tech-assist.org/secure/tip</a>/ > >> > > > >------------------------------------------ > >To REMOVE your email address, click here: > > <a href=3D"http://mail.houseoftelevision.com/jump/http://www.tech-assist.org/u= nsubb.html">http://www.tech-assist.org/unsubb.html</a> > >To CHANGE your email address, click here: > > <a href=3D"http://mail.houseoftelevision.com/jump/http://www.techassist.net/fo= rms/change.html">http://www.techassist.net/forms/change.html</a> > >------------------------------------------ > >***NEW*** Tips Added Instantly!!!*** > >Submit Repair Tips here: > ><a href=3D"http://mail.houseoftelevision.com/jump/http://www.tech-assist.org/s= ecure/tip">http://www.tech-assist.org/secure/tip</a>/ > > >=20 > ------------------------------------------ > To REMOVE your email address, click here: > <a href=3D"http://mail.houseoftelevision.com/jump/http://www.tech-assist.org/u= nsubb.html">http://www.tech-assist.org/unsubb.html</a> > To CHANGE your email address, click here: > <a href=3D"http://mail.houseoftelevision.com/jump/http://www.techassist.net/fo= rms/change.html">http://www.techassist.net/forms/change.html</a> > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here:=20 > <a href=3D"http://mail.houseoftelevision.com/jump/http://www.tech-assist.org/s= ecure/tip">http://www.tech-assist.org/secure/tip</a>/ ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/