Hi Terry, Can't be a short in the G2. I pulled the Pic tube socket as mentioned, and screen voltage is the same. Paul "Terry H." <tvdoc@xxxxxxxxxxxxxx> wrote:If this is a T8 chassis, you have a G2 short in the crt. Can be removed by discharging the anode into the G2 pin of the crt if you're not replacing the tube under warranty. The TV Shop Gonzales, Tx ----- Original Message ----- From: "Paul" To: Sent: Friday, December 26, 2003 1:54 PM Subject: [TechAssist] Philips 27PS55S321 > Hv comes up wave form looks normal at collector of HOP xstr. Plays for about 5 seconds and shuts down. Have pulled the pic tube socket. The B+ is 127v at the HOP xstr. The scvreen voltage is only 6v. Bad IHVT? Screen voltage winding shorted ? It is not burning. Maybe isn't on long enough to burn? Paul > > Paul ,B Central TV&Video Grover Beach Ca. > > **************************************************************************** * > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > > [Scanned by AwesomeNet Anti-Virus] > > > [Scanned by AwesomeNet Anti-Virus] > > [Scanned by AwesomeNet Anti-Virus] ***************************************************************************** Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ Paul ,B Central TV&Video Grover Beach Ca. ***************************************************************************** Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/