Hi Bob Am measuring voltage at the screen wire from the IHVT. With the socket board pulled. Paul Gemini Computer & TV <geminitv@xxxxxxxxxxxxxxxx> wrote:Are you measuring the G2 at the CRT socket pin 7? If so, go back a bit on the CRT PCB and see if you have it on the other side of resistor 3343. Bob Waterman, CET® #RI-28 Master Technician License #9109 Service Manager / Parts Manager Gemini Computer, TV, & Security Alarms (508)695-7302 (508)695-7769 FAX geminitv@xxxxxxxxxxxxxxxx geminitv@xxxxxxx www.geminicomputertvsecurityalarms.com ------- Original Message ----- From: "Paul" To: Sent: Friday, December 26, 2003 2:54 PM Subject: [TechAssist] Philips 27PS55S321 > Hv comes up wave form looks normal at collector of HOP xstr. Plays for about 5 seconds and shuts down. Have pulled the pic tube socket. The B+ is 127v at the HOP xstr. The scvreen voltage is only 6v. Bad IHVT? Screen voltage winding shorted ? It is not burning. Maybe isn't on long enough to burn? Paul > > Paul ,B Central TV&Video Grover Beach Ca. > > **************************************************************************** * > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ***************************************************************************** Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ Paul ,B Central TV&Video Grover Beach Ca. ***************************************************************************** Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/