Don did you try putting in an IF signal after the tuner, and after the Saw filter. al marquardt ampm@xxxxxxx ----- Original Message ----- From: "Don Hartigan" <hartstv@xxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Friday, May 17, 2002 6:31 AM Subject: [TechAssist] Orion-TVCR mod#tvcr1321,blue screen > This unit has blue screen when rf connected to cable i/p.VCR has good picture/sound on playback.A/V inputs ok.I subbed out the tuner,no help,&checked voltages;BT=30vdc,BP=5vdc,BM=9vdc,AGC line is sitting at 7.5vdc.Unit will sometimes show a very snowy,no sound picture,which cannot be changed by trying to channel up/down,#'s on screen will change.Unit will auto-program.This uses a LA7583=IC6001 in the tuner cct,as per data sheet it's the VIF/SIF control ic,voltages to it are ok.Have checked my parts sources & they don't list it.Does anyone have one or know where I can get it.It ''MAY'' be my problem.All i/p's welcome on this little 13''..TIA..Don....... > HARTS-TVCR''ASC'' > 9-Robert St.,Oromocto,NewBrunswick,CAN > Tel#506-357-9785Fax#506-357-6010 > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ > > ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/