[TechAssist] Re: Mitsubishi Model cs-26301 FIXED ! PIP module
- From: Mike Barnett <passthecash@xxxxxxxxxx>
- To: techassist@xxxxxxxxxxxxx
- Date: Sat, 13 Oct 2001 13:30:38 -0700 (PDT)
THANKS Jeff for all the help. Fixed and shiiped.This is a good one.
Mike
On Sat, 13 Oct 2001 10:08:59 -0400, techassist@xxxxxxxxxxxxx wrote:
>
> Oh yeah....after the mod....leave the PIP out!
>
> Save the PIP & clip the VP plug and make yourself a test plug for future
> repairs on these!
>
> Jeff Stielau
> Shoreline Electronics Repair
> 125 Beechtree Lane
> Westbrook,CT 06498
> 860-399-1861 Voice
> 860-664-3535 Fax
> jstielau@xxxxxxxx
>
> ----- Original Message -----
> From: "Mike Barnett" <passthecash@xxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Saturday, October 13, 2001 7:32 AM
> Subject: [TechAssist] Re: Mitsubishi Model cs-26301 PIP module
>
>
> >
> > Jeff, thanks ALOT! This is great info. could you elaborate a bit more,
pin
> 7
> > to pin 9 you say install .01 is this a resistor? if so at what
wattage(1/8
> > 1/4 1/2??) or doesn't it matter? should i modify the main board and
leav
> the
> > pip out or do the mod on the pip mod and re-install?
> > Thanks again
> > Mike
> >
> >
> >
> >
> >
> > On Fri, 12 Oct 2001 19:34:51 -0400, techassist@xxxxxxxxxxxxx wrote:
> >
> > >
> > > Mike,
> > >
> > > If the customer never uses the PIP it's best to bypass the
board....it
> > may
> > > cause more problem years from now.
> > >
> > > Here's the bypass procedure :
> > >
> > > Remove "Vp" Plug From Pip Mod.Install .01 From Pin 7 To Pin 9
Install
> > > 4.7/35-50v;Pos.To Pin 5,Neg. To Pin 11
> > >
> > > If it's a set we have on the bench , I'll solder the 2 parts on the
> > bottom
> > > of the chassis instead of having to remove the plug from the PIP.
> > >
> > > We do keep a VP plug all ready to go in our service kit for a
quick
> > bypass
> > > check in the field or on the bench.
> > >
> > > Jeff Stielau
> > > Shoreline Electronics Repair
> > > 125 Beechtree Lane
> > > Westbrook,CT 06498
> > > 860-399-1861 Voice
> > > 860-664-3535 Fax
> > > jstielau@xxxxxxxx
> > >
> > > ----- Original Message -----
> > > From: "Mike Barnett" <passthecash@xxxxxxxxxx>
> > > To: <techassist@xxxxxxxxxxxxx>
> > > Sent: Friday, October 12, 2001 2:42 PM
> > > Subject: [TechAssist] Mitsubishi Model cs-26301 PIP module
> > >
> > >
> > > >
> > > > Anyone know a good source for the pip module in model# cs-26301.
> > > > PIP module # P12187258. this unit has loss of vertical hold after
on
> > about
> > > 5
> > > > min. Pulled pip mod and has leaky smd caps all over it with
> > contaminated
> > > > traces. Dont want to even try to rebuild. any help would be great.
> > > >
> > > > Thanks,
> > > > Mike
> > > >
> > > >
> > > > Get It Fixed At
> > > > Rochester Electronics
> > > > 630 West Ridge Rd.
> > > > Rochester, NY 14615
> > > > 716.663.6870
> > > > www.RochesterElectronicsRepair.com
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > _______________________________________________________
> > > > Send a cool gift with your E-Card
> > > > http://www.bluemountain.com/giftcenter/
> > > >
> > > >
> > > > Help make your TechAssist online repair tips
> > > > database better! Submit your fixes here:
> > > > http://www.circuitwork.com/techassist/tip/#tips
> > > > To unsubscribe write to:
> > > > techassist-request@xxxxxxxxxxxxx
> > > > with unsubscribe in the subject line.
> > > >
> > >
> > > Help make your TechAssist online repair tips
> > > database better! Submit your fixes here:
> > > http://www.circuitwork.com/techassist/tip/#tips
> > > To unsubscribe write to:
> > > techassist-request@xxxxxxxxxxxxx
> > > with unsubscribe in the subject line.
> >
> >
> > Get It Fixed At
> > Rochester Electronics
> > 630 West Ridge Rd.
> > Rochester, NY 14615
> > 716.663.6870
> > www.RochesterElectronicsRepair.com
> >
> >
> >
> >
> >
> > _______________________________________________________
> > Send a cool gift with your E-Card
> > http://www.bluemountain.com/giftcenter/
> >
> >
> > Help make your TechAssist online repair tips
> > database better! Submit your fixes here:
> > http://www.circuitwork.com/techassist/tip/#tips
> > To unsubscribe write to:
> > techassist-request@xxxxxxxxxxxxx
> > with unsubscribe in the subject line.
> >
>
> Help make your TechAssist online repair tips
> database better! Submit your fixes here:
> http://www.circuitwork.com/techassist/tip/#tips
> To unsubscribe write to:
> techassist-request@xxxxxxxxxxxxx
> with unsubscribe in the subject line.
Get It Fixed At
Rochester Electronics
630 West Ridge Rd.
Rochester, NY 14615
716.663.6870
www.RochesterElectronicsRepair.com
_______________________________________________________
Send a cool gift with your E-Card
http://www.bluemountain.com/giftcenter/
Help make your TechAssist online repair tips
database better! Submit your fixes here:
http://www.circuitwork.com/techassist/tip/#tips
To unsubscribe write to:
techassist-request@xxxxxxxxxxxxx
with unsubscribe in the subject line.
Other related posts:
