Done, Thanks again Jeff for your Help. I realy appreciate it. Mike. On Sat, 13 Oct 2001 17:22:49 -0400, techassist@xxxxxxxxxxxxx wrote: > > You'll see many of these. > > If you kept the PIP module....remove that VP connector & make a plug in > bypass assembly for the future. > > Jeff Stielau > Shoreline Electronics Repair > 125 Beechtree Lane > Westbrook,CT 06498 > 860-399-1861 Voice > 860-664-3535 Fax > jstielau@xxxxxxxx > > ----- Original Message ----- > From: "Mike Barnett" <passthecash@xxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Saturday, October 13, 2001 4:30 PM > Subject: [TechAssist] Re: Mitsubishi Model cs-26301 FIXED ! PIP module > > > > > > THANKS Jeff for all the help. Fixed and shiiped.This is a good one. > > > > Mike > > > > On Sat, 13 Oct 2001 10:08:59 -0400, techassist@xxxxxxxxxxxxx wrote: > > > > > > > > Oh yeah....after the mod....leave the PIP out! > > > > > > Save the PIP & clip the VP plug and make yourself a test plug for > future > > > repairs on these! > > > > > > Jeff Stielau > > > Shoreline Electronics Repair > > > 125 Beechtree Lane > > > Westbrook,CT 06498 > > > 860-399-1861 Voice > > > 860-664-3535 Fax > > > jstielau@xxxxxxxx > > > > > > ----- Original Message ----- > > > From: "Mike Barnett" <passthecash@xxxxxxxxxx> > > > To: <techassist@xxxxxxxxxxxxx> > > > Sent: Saturday, October 13, 2001 7:32 AM > > > Subject: [TechAssist] Re: Mitsubishi Model cs-26301 PIP module > > > > > > > > > > > > > > Jeff, thanks ALOT! This is great info. could you elaborate a bit > more, > > pin > > > 7 > > > > to pin 9 you say install .01 is this a resistor? if so at what > > wattage(1/8 > > > > 1/4 1/2??) or doesn't it matter? should i modify the main board and > > leav > > > the > > > > pip out or do the mod on the pip mod and re-install? > > > > Thanks again > > > > Mike > > > > > > > > > > > > > > > > > > > > > > > > On Fri, 12 Oct 2001 19:34:51 -0400, techassist@xxxxxxxxxxxxx wrote: > > > > > > > > > > > > > > Mike, > > > > > > > > > > If the customer never uses the PIP it's best to bypass the > > board....it > > > > may > > > > > cause more problem years from now. > > > > > > > > > > Here's the bypass procedure : > > > > > > > > > > Remove "Vp" Plug From Pip Mod.Install .01 From Pin 7 To Pin 9 > > Install > > > > > 4.7/35-50v;Pos.To Pin 5,Neg. To Pin 11 > > > > > > > > > > If it's a set we have on the bench , I'll solder the 2 parts on > the > > > > bottom > > > > > of the chassis instead of having to remove the plug from the PIP. > > > > > > > > > > We do keep a VP plug all ready to go in our service kit for a > > quick > > > > bypass > > > > > check in the field or on the bench. > > > > > > > > > > Jeff Stielau > > > > > Shoreline Electronics Repair > > > > > 125 Beechtree Lane > > > > > Westbrook,CT 06498 > > > > > 860-399-1861 Voice > > > > > 860-664-3535 Fax > > > > > jstielau@xxxxxxxx > > > > > > > > > > ----- Original Message ----- > > > > > From: "Mike Barnett" <passthecash@xxxxxxxxxx> > > > > > To: <techassist@xxxxxxxxxxxxx> > > > > > Sent: Friday, October 12, 2001 2:42 PM > > > > > Subject: [TechAssist] Mitsubishi Model cs-26301 PIP module > > > > > > > > > > > > > > > > > > > > > > Anyone know a good source for the pip module in model# cs-26301. > > > > > > PIP module # P12187258. this unit has loss of vertical hold > after > > on > > > > about > > > > > 5 > > > > > > min. Pulled pip mod and has leaky smd caps all over it with > > > > contaminated > > > > > > traces. Dont want to even try to rebuild. any help would be > great. > > > > > > > > > > > > Thanks, > > > > > > Mike > > > > > > > > > > > > > > > > > > Get It Fixed At > > > > > > Rochester Electronics > > > > > > 630 West Ridge Rd. > > > > > > Rochester, NY 14615 > > > > > > 716.663.6870 > > > > > > www.RochesterElectronicsRepair.com > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________________ > > > > > > Send a cool gift with your E-Card > > > > > > http://www.bluemountain.com/giftcenter/ > > > > > > > > > > > > > > > > > > Help make your TechAssist online repair tips > > > > > > database better! Submit your fixes here: > > > > > > http://www.circuitwork.com/techassist/tip/#tips > > > > > > To unsubscribe write to: > > > > > > techassist-request@xxxxxxxxxxxxx > > > > > > with unsubscribe in the subject line. > > > > > > > > > > > > > > > > Help make your TechAssist online repair tips > > > > > database better! Submit your fixes here: > > > > > http://www.circuitwork.com/techassist/tip/#tips > > > > > To unsubscribe write to: > > > > > techassist-request@xxxxxxxxxxxxx > > > > > with unsubscribe in the subject line. > > > > > > > > > > > > Get It Fixed At > > > > Rochester Electronics > > > > 630 West Ridge Rd. > > > > Rochester, NY 14615 > > > > 716.663.6870 > > > > www.RochesterElectronicsRepair.com > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________________ > > > > Send a cool gift with your E-Card > > > > http://www.bluemountain.com/giftcenter/ > > > > > > > > > > > > Help make your TechAssist online repair tips > > > > database better! Submit your fixes here: > > > > http://www.circuitwork.com/techassist/tip/#tips > > > > To unsubscribe write to: > > > > techassist-request@xxxxxxxxxxxxx > > > > with unsubscribe in the subject line. > > > > > > > > > > Help make your TechAssist online repair tips > > > database better! Submit your fixes here: > > > http://www.circuitwork.com/techassist/tip/#tips > > > To unsubscribe write to: > > > techassist-request@xxxxxxxxxxxxx > > > with unsubscribe in the subject line. > > > > > > Get It Fixed At > > Rochester Electronics > > 630 West Ridge Rd. > > Rochester, NY 14615 > > 716.663.6870 > > www.RochesterElectronicsRepair.com > > > > > > > > > > > > _______________________________________________________ > > Send a cool gift with your E-Card > > http://www.bluemountain.com/giftcenter/ > > > > > > Help make your TechAssist online repair tips > > database better! Submit your fixes here: > > http://www.circuitwork.com/techassist/tip/#tips > > To unsubscribe write to: > > techassist-request@xxxxxxxxxxxxx > > with unsubscribe in the subject line. > > > > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. Get It Fixed At Rochester Electronics 630 West Ridge Rd. Rochester, NY 14615 716.663.6870 www.RochesterElectronicsRepair.com _______________________________________________________ Send a cool gift with your E-Card http://www.bluemountain.com/giftcenter/ Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.