I have a print for a CK 3500 (M51366SP) IC 101 Video SIF. If it uses the same chip can send a copy. This print is 2 ft by 3 ft, will send as needed. If it is not similar just disregard Dave. Bruce B&T Electronics. ----- Original Message ----- From: "Dave Routson" <davestv@xxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Monday, July 29, 2002 11:12 AM Subject: [TechAssist] Mitsubishi CS-3521R need partial print video or > > Wondering if anyone has a print of video luminance > of Mit CS-3521R. I have what looks like a loss of > luminance signal. I did the PIP bypass and the chroma > signal is there but seem to be missing the lum signal and > having difficult time trying to trace where the lum and > chrom are processed. It also has a resistor that has > overheated and may have changed value but cannot > identify what it is. It is R8A2 and beside it an integrated > circuit C7A8 looks like it was heated by the R8A2 > and may be damaged. Any help appreciated. > Dave Routson > davestv@xxxxxxxxxxx > 208 Stroud > Cleburne, TX 76033-8738 > > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.tech-assist.org/change.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.tech-assist.org/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/