Mike, I have no print on this set...I'm going from my tips database for your answers. If you have enough $$ to play with on this set ....you should get the manual. Jeff Stielau Shoreline Electronics Repair 125 Beechtree Lane Westbrook,CT 06498 860-399-1861 Voice 860-664-3535 Fax jstielau@xxxxxxxx ----- Original Message ----- From: "Mike Barnett" <passthecash@xxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Saturday, October 13, 2001 1:06 PM Subject: [TechAssist] Re: Mitsubishi CS-2651R No sound > > Jeff, no external out on this set, even so, ic3a0 i believe should still > have some kind of signal on pins 12,18 or 20? there is none. > and ic 101 pin 24=11vdc no audio on that ic anywere either. > any suggestions? > > Mike > > > > On Sat, 13 Oct 2001 10:18:25 -0400, techassist@xxxxxxxxxxxxx wrote: > > > > > Do you have audio on the EXT outputs? if so the possible Defective > Ic3a0. > > > > or > > > > If Ic101 pin#24 = 0v, Replace C113 (470uf 16v) > > > > Jeff Stielau > > Shoreline Electronics Repair > > 125 Beechtree Lane > > Westbrook,CT 06498 > > 860-399-1861 Voice > > 860-664-3535 Fax > > jstielau@xxxxxxxx > > > > ----- Original Message ----- > > From: "Mike Barnett" <passthecash@xxxxxxxxxx> > > To: <techassist@xxxxxxxxxxxxx> > > Sent: Saturday, October 13, 2001 9:57 AM > > Subject: [TechAssist] Mitsubishi CS-2651R No sound > > > > > > > > > > Hi guys, I have this mitsubishi model CS-2651R no audio, i dont have a > > print > > > for this but have checked sound board and cant seem to find a good > audio > > > sygnal. it seems like the audio is stuck on mute. Still, cant seem to > find > > a > > > good audio waveform even on the main board. On the sound > board(mitsubishi > > > pt#930B15901) at ic3A2(TA7630P/NTE1576) > > > pin 2 and 16 are audio input, no signal. i know the amp curcuit is > working > > > by bypassing this ic and injecting a 10khz. sygnal to amp, speakers > work > > > fine and has audio. could this ic be bad? Also there is an ic on the > main > > > board ic101(la7520/nte1728) and has audio driver curcuit in it and also > > > controls muting. has anyone seen this go bad. > > > is there something i'm missing or should i change these ic's. > > > Any help? > > > > > > Thanks much in advance, > > > Mike > > > > > > > > > > > > Get It Fixed At > > > Rochester Electronics > > > 630 West Ridge Rd. > > > Rochester, NY 14615 > > > 716.663.6870 > > > www.RochesterElectronicsRepair.com > > > > > > > > > > > > > > > > > > _______________________________________________________ > > > Send a cool gift with your E-Card > > > http://www.bluemountain.com/giftcenter/ > > > > > > > > > Help make your TechAssist online repair tips > > > database better! Submit your fixes here: > > > http://www.circuitwork.com/techassist/tip/#tips > > > To unsubscribe write to: > > > techassist-request@xxxxxxxxxxxxx > > > with unsubscribe in the subject line. > > > > > > > Help make your TechAssist online repair tips > > database better! Submit your fixes here: > > http://www.circuitwork.com/techassist/tip/#tips > > To unsubscribe write to: > > techassist-request@xxxxxxxxxxxxx > > with unsubscribe in the subject line. > > > Get It Fixed At > Rochester Electronics > 630 West Ridge Rd. > Rochester, NY 14615 > 716.663.6870 > www.RochesterElectronicsRepair.com > > > > > > _______________________________________________________ > Send a cool gift with your E-Card > http://www.bluemountain.com/giftcenter/ > > > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. > Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.