Hi guys, I have this mitsubishi model CS-2651R no audio, i dont have a print for this but have checked sound board and cant seem to find a good audio sygnal. it seems like the audio is stuck on mute. Still, cant seem to find a good audio waveform even on the main board. On the sound board(mitsubishi pt#930B15901) at ic3A2(TA7630P/NTE1576) pin 2 and 16 are audio input, no signal. i know the amp curcuit is working by bypassing this ic and injecting a 10khz. sygnal to amp, speakers work fine and has audio. could this ic be bad? Also there is an ic on the main board ic101(la7520/nte1728) and has audio driver curcuit in it and also controls muting. has anyone seen this go bad. is there something i'm missing or should i change these ic's. Any help? Thanks much in advance, Mike Get It Fixed At Rochester Electronics 630 West Ridge Rd. Rochester, NY 14615 716.663.6870 www.RochesterElectronicsRepair.com _______________________________________________________ Send a cool gift with your E-Card http://www.bluemountain.com/giftcenter/ Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.