Sounds like a problem with the lamp or the ballast, common problem with the Samsung and Sony LCD's and DLP's. Mits probably uses the same lamp. ******************************************************************************************************************* Since 1972 Jim Myers Telrad Electronics Fort Wayne, Indiana armando guerra wrote: > Does anyone here have any tips or suggestions on this set? It has 2 leds > in front.One above the other.The one above say's Power > (Green),Timer(red).The one below say's > Temp(Green),Lamp(red).With the set just being plugged in to ac,the > bottom led is blinking red.As I power the set up,the top led goes green > for just a few seconds and then goes off,relay clicks, and then the > bottom red led is blinking again.Since the red (lamp)is blinking,would > this be an indication of a bad lamp? Not familiar with this sets yet.In > the front panel it say's lcd projection. Hopefully someone has worked on > one of this sets and can give me some help or tips.Does this lcd tv work > on the same principal as the DLP tv's? Just wondering. Thanks for all > your help. > Mando > Birdie's TV & ELectronics > Casa GRande, AZ > > > ----------------------------------------------------------------------------- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/