I've seen STR30130 cause this. Check 130v regulated voltage Peggs At 11:13 AM 10/21/02 -0700, roger birmingham wrote: > >Magnavox(MODEL: RG5946---possibly 26C8 chassis) > >Problem: > >When first turn on set the picture is squeezed down to about 5 inches. > >Also no video(blank screen). > >After about 30 seconds the picture will come in and will start spreading out vertically. > >Have replaced vertical IC-580 > >Put in TDA3654Q( wondering if this is the right chip) > >When set first came in no vertical deflection. > > > >Any help appreciated. > > > >Rogers Electronics > >1-205-698-8047 > > > >--------------------------------- >Do you Yahoo!? >Y! Web Hosting - Let the expert host your web site > >------------------------------------------ >To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html >To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html >------------------------------------------ >***NEW*** Tips Added Instantly!!!*** >Submit Repair Tips here: >http://www.tech-assist.org/secure/tip/ > Peggs' Electronics 1519 West 2nd Street Owensboro,KY 42301 270-926-4968 fax 270-686-7399 ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/