I checked both are ok if R445 was open it would be no deflection at all but I have some deflection about 4 inch but not strait line like usual vertical problems thanks anyway Ken Dinckan ALL Tv&Appliance Service 2747 Roosevelt Street # B Carlsbad CA, 92008 tel: (760)434-1131 fax: (760)434-8856 email to : kdinckan@xxxxxxx ----- Original Message ----- From: "Ken Dinckan" <kdinckan@xxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, February 06, 2002 11:27 PM Subject: [TechAssist] Re: Magnavox tv . RK4910 AK04 no full vertical deflection > > ok thanks I will check it > > Ken Dinckan > ALL Tv&Appliance Service > 2747 Roosevelt Street # B > Carlsbad CA, 92008 > tel: (760)434-1131 > fax: (760)434-8856 > email to : kdinckan@xxxxxxx > ----- Original Message ----- > From: "Larry E." <videotech@xxxxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Thursday, February 07, 2002 11:12 AM > Subject: [TechAssist] Re: Magnavox tv . RK4910 AK04 no full vertical > deflection > > > > > > Ken, I don`t know if this will help you or not but it`s worth a check, > > Pull C445 100uf@50 > > and if it`s bad, R445 1 ohm 1/4 watt will be fried usually, Hope this > > helps! > > Larry E. > > American TV & Electronics > > > > Ken Dinckan wrote: > > > > >Chassis # 25P1-02 > > >This set came in with vertical sweep problem but has different shape then > usual vertical problems. It is like bow type screen it is not straight line > on both sides. Replaced the vertical output IC no change. Check the yoke > looks ok.. has anyone worked on this chassis and the problem > > >thanks for your time > > > > > >Ken Dinckan > > >ALL Tv&Appliance Service > > >2747 Roosevelt Street # B > > >Carlsbad CA, 92008 > > >tel: (760)434-1131 > > >fax: (760)434-8856 > > >email to : kdinckan@xxxxxxx > > > > > >------------------------------------------ > > >Make your TechAssist database better! > > >Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > > >------------------------------------------ > > >To UNSUBSCRIBE your email address, click here: > > >mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > > >Or send a BLANK email with unsubscribe in the > > >SUBJECT field to the address above. > > > > > > > > > > > > ------------------------------------------ > > Make your TechAssist database better! > > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > > ------------------------------------------ > > To UNSUBSCRIBE your email address, click here: > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > > Or send a BLANK email with unsubscribe in the > > SUBJECT field to the address above. > > > > > > > ------------------------------------------ > Make your TechAssist database better! > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. > > ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.