This might be because one half of the yoke (one of the two parallel windings) is open. If you are lucky, you might be able to see a green spot in the windings where the break is, and then patch it. Art Bevilacqua Essex Radio and TV 40 Main Street Essex, MA 01929 abevilac@xxxxxxxxxxxxx -----Original Message----- From: techassist-bounce@xxxxxxxxxxxxx [mailto:techassist-bounce@xxxxxxxxxxxxx] On Behalf Of Ken Dinckan Sent: Wednesday, February 06, 2002 11:01 AM To: techassist@xxxxxxxxxxxxx Subject: [TechAssist] Magnavox tv . RK4910 AK04 no full vertical deflection Chassis # 25P1-02 This set came in with vertical sweep problem but has different shape then usual vertical problems. It is like bow type screen it is not straight line on both sides. Replaced the vertical output IC no change. Check the yoke looks ok.. has anyone worked on this chassis and the problem thanks for your time Ken Dinckan ALL Tv&Appliance Service 2747 Roosevelt Street # B Carlsbad CA, 92008 tel: (760)434-1131 fax: (760)434-8856 email to : kdinckan@xxxxxxx ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above. ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.