Ken, sorry , thought you had total collapse, do you have 26 volts to IC550 pin 8? 13.8 on pin 4? I`ve got the print for that set if you need more info, Larry E. Ken Dinckan wrote: >I checked both are ok >if R445 was open it would be no deflection at all but I have some deflection >about 4 inch but not strait line like usual vertical problems >thanks anyway > >Ken Dinckan >ALL Tv&Appliance Service >2747 Roosevelt Street # B >Carlsbad CA, 92008 >tel: (760)434-1131 >fax: (760)434-8856 >email to : kdinckan@xxxxxxx >----- Original Message ----- >From: "Ken Dinckan" <kdinckan@xxxxxxx> >To: <techassist@xxxxxxxxxxxxx> >Sent: Wednesday, February 06, 2002 11:27 PM >Subject: [TechAssist] Re: Magnavox tv . RK4910 AK04 no full vertical >deflection > > >>ok thanks I will check it >> >>Ken Dinckan >>ALL Tv&Appliance Service >>2747 Roosevelt Street # B >>Carlsbad CA, 92008 >>tel: (760)434-1131 >>fax: (760)434-8856 >>email to : kdinckan@xxxxxxx >>----- Original Message ----- >>From: "Larry E." <videotech@xxxxxxxxxxxx> >>To: <techassist@xxxxxxxxxxxxx> >>Sent: Thursday, February 07, 2002 11:12 AM >>Subject: [TechAssist] Re: Magnavox tv . RK4910 AK04 no full vertical >>deflection >> >> >>>Ken, I don`t know if this will help you or not but it`s worth a check, >>>Pull C445 100uf@50 >>>and if it`s bad, R445 1 ohm 1/4 watt will be fried usually, Hope this >>>helps! >>>Larry E. >>>American TV & Electronics >>> >>>Ken Dinckan wrote: >>> >>>>Chassis # 25P1-02 >>>>This set came in with vertical sweep problem but has different shape >>>> >then > >>usual vertical problems. It is like bow type screen it is not straight >> >line > >>on both sides. Replaced the vertical output IC no change. Check the yoke >>looks ok.. has anyone worked on this chassis and the problem >> >>>>thanks for your time >>>> >>>>Ken Dinckan >>>>ALL Tv&Appliance Service >>>>2747 Roosevelt Street # B >>>>Carlsbad CA, 92008 >>>>tel: (760)434-1131 >>>>fax: (760)434-8856 >>>>email to : kdinckan@xxxxxxx >>>> >>>>------------------------------------------ >>>>Make your TechAssist database better! >>>>Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ >>>>------------------------------------------ >>>>To UNSUBSCRIBE your email address, click here: >>>>mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe >>>>Or send a BLANK email with unsubscribe in the >>>>SUBJECT field to the address above. >>>> >>>> >>> >>>------------------------------------------ >>>Make your TechAssist database better! >>>Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ >>>------------------------------------------ >>>To UNSUBSCRIBE your email address, click here: >>>mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe >>>Or send a BLANK email with unsubscribe in the >>>SUBJECT field to the address above. >>> >>> >> >>------------------------------------------ >>Make your TechAssist database better! >>Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ >>------------------------------------------ >>To UNSUBSCRIBE your email address, click here: >>mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe >>Or send a BLANK email with unsubscribe in the >>SUBJECT field to the address above. >> >> > > >------------------------------------------ >Make your TechAssist database better! >Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ >------------------------------------------ >To UNSUBSCRIBE your email address, click here: >mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe >Or send a BLANK email with unsubscribe in the >SUBJECT field to the address above. > > ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.