I remove the flyback and get 49 rings, the yoke is mine on my jig. barrystv@xxxxxxx Barrys TV Ottawa Canada ----- Original Message ----- From: "Gemini Computer & TV" <geminitv@xxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Monday, November 08, 2004 7:17 AM Subject: [TechAssist] Re: KV32V68 Big Problem > Have you ruled out the yoke and the flyback? > > Bob Waterman, CET® #RI-28 > Master Technician License #9109 > Service Manager / Parts Manager > Gemini Computer, TV, & Security Alarms > (508)695-7302 > (508)695-7769 FAX > geminitv@xxxxxxxxxxx > > > ----- Original Message ----- > From: "Barry Thompson" <barrystv@xxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Friday, November 05, 2004 6:29 PM > Subject: [TechAssist] KV32V68 Big Problem > > >> Hi: All: This set keeps blowing hots regulators,resolder drive xformer >> changed .47 cap. The waveform on the base of the looks good,but the >> applitude only 35 volts pp with signal instead of 50.3 pp.The waveform on >> the base and collector seem of the driver seem ok.The B+ is 135 volts and >> clean. No shorts on secondary.Is 15 volts a normal variation? Thanks >> Barry >> . >> barrystv@xxxxxxx >> Barrys TV >> Ottawa Canada >> >> >> -------------------------------------------------------------------------- > --- >> Lost Password: >> http://www.tech-assist.org and select "Login Problems?". >> Email Archives: >> //www.freelists.org/archives/techassist/ >> > > > > ----------------------------------------------------------------------------- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/