Have you ruled out the yoke and the flyback? Bob Waterman, CET® #RI-28 Master Technician License #9109 Service Manager / Parts Manager Gemini Computer, TV, & Security Alarms (508)695-7302 (508)695-7769 FAX geminitv@xxxxxxxxxxx ----- Original Message ----- From: "Barry Thompson" <barrystv@xxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Friday, November 05, 2004 6:29 PM Subject: [TechAssist] KV32V68 Big Problem > Hi: All: This set keeps blowing hots regulators,resolder drive xformer > changed .47 cap. The waveform on the base of the looks good,but the > applitude only 35 volts pp with signal instead of 50.3 pp.The waveform on > the base and collector seem of the driver seem ok.The B+ is 135 volts and > clean. No shorts on secondary.Is 15 volts a normal variation? Thanks Barry > . > barrystv@xxxxxxx > Barrys TV > Ottawa Canada > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/