Yeah, Ed got it, I got it, you gotta get to know Doug.....he's a good one. Damon Brunger Telrad Electronics Ft. Wayne, IN ----- Original Message ----- From: "Edward Gaidies" <teltek3@xxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Monday, November 08, 2004 10:06 AM Subject: [TechAssist] Re: KV32V68 Big Problem > When you get to know Doug a little better, you will.;-) > > > -Ed- > ***************************************************************** > Ed Gaidies=09 > Tel-Tek Electronics > Ontario-Canada > teltek3@xxxxxxxxxxxx > teltek@xxxxxxxxx=09 > > On 8-Nov-04, at 9:04 AM, Barry Thompson wrote: > >> Doug: Could not understand your post. >> barrystv@xxxxxxx >> Barrys TV >> Ottawa Canada >> >> ----- Original Message ----- >> From: "Doug Keller" <dek@xxxxxxxxxxxxxx> >> To: <techassist@xxxxxxxxxxxxx> >> Sent: Monday, November 08, 2004 7:31 AM >> Subject: [TechAssist] Re: KV32V68 Big Problem >> >> >>> He probably couldn't since Rehnquist is sick. >>> >>> Doug Keller >>> Wis-Kel Electronics >>> 101 Freeland Ave. >>> Terra Alta, WV >>> USA 26764 >>> dek@xxxxxxxxxxxxxx >>> dek@xxxxxxxxxxxxxxx >>> http://www.tech-assist.org >>> "Learn from the mistakes of others, because you >>> won't live long enough to make them all yourself" >>> >>> >>> >>> >>> >>> Gemini Computer & TV wrote: >>> >>>> Have you ruled out the yoke and the flyback? >>>> >>>> Bob Waterman, CET=AE #RI-28 >>>> Master Technician License #9109 >>>> Service Manager / Parts Manager >>>> Gemini Computer, TV, & Security Alarms >>>> (508)695-7302 >>>> (508)695-7769 FAX >>>> geminitv@xxxxxxxxxxx >>>> >>>> >>>> ----- Original Message ----- >>>> From: "Barry Thompson" <barrystv@xxxxxxx> >>>> To: <techassist@xxxxxxxxxxxxx> >>>> Sent: Friday, November 05, 2004 6:29 PM >>>> Subject: [TechAssist] KV32V68 Big Problem >>>> >>>> >>>> >>>> >>>>> Hi: All: This set keeps blowing hots regulators,resolder drive =20 >>>>> xformer >>>>> changed .47 cap. The waveform on the base of the looks good,but the >>>>> applitude only 35 volts pp with signal instead of 50.3 pp.The =20 >>>>> waveform on >>>>> the base and collector seem of the driver seem ok.The B+ is 135 =20 >>>>> volts and >>>>> clean. No shorts on secondary.Is 15 volts a normal variation? = > Thanks >>>>> Barry >>>>> . >>>>> barrystv@xxxxxxx >>>>> Barrys TV >>>>> Ottawa Canada >>>>> >>>>> >>>>> = > --------------------------------------------------------------------=20 >>>>> ------ >>>>> >>>>> >>>> --- >>>> >>>> >>>>> Lost Password: >>>>> http://www.tech-assist.org and select "Login Problems?". >>>>> Email Archives: >>>>> //www.freelists.org/archives/techassist/ >>>>> >>>>> >>>>> >>>> >>>> >>>> >>>> = > ---------------------------------------------------------------------=20 >>>> -------- >>>> Lost Password: >>>> http://www.tech-assist.org and select "Login Problems?". >>>> Email Archives: >>>> //www.freelists.org/archives/techassist/ >>>> >>>> >>>> >>>> >>>> >>> >>> = > ----------------------------------------------------------------------=20= > >>> ------- >>> Lost Password: >>> http://www.tech-assist.org and select "Login Problems?". >>> Email Archives: >>> //www.freelists.org/archives/techassist/ >> >> >> = > -----------------------------------------------------------------------=20= > >> ------ >> Lost Password: >> http://www.tech-assist.org and select "Login Problems?". >> Email Archives: >> //www.freelists.org/archives/techassist/ >> > > > ----------------------------------------------------------------------------- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/