Mando, There should be an option in the menu for convergence. Do you have the service manual? If not, you can get it by applying online for free. www.hitachiserviceusa.com Jeff -- Intrepid Video TV/VCR Repair 263 S Front St, Steelton PA 17113 717-939-7708; (F) 717-564-4952 www.intrepid-video.com www.tech-repair.net ----- Original Message ----- From: "armando guerra" <birdie@xxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, October 26, 2004 9:11 PM Subject: [TechAssist] Hitachi Big Screen TV Model 53SDX89/convergence problem This set came in with the convergence way off and also the top of screen was bowed pretty bad also. I replaced both of the STK-392-110 and resoldered some bad connections and when I powered the set on,the pix is not bowed any more and its alot better but the red is still off. I can't find in the customer menu a section for the convergence setup cross.The only thing I see is a Magic Focus menu.Is there a particular menu that I have to bring up so that I can adjust the red? I checked all the E92,94,95 pico fuses and all are ok unless I am missing one.Thanks. Mando Birdie's TV & Electronics Casa GRande, AZ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/