You bet ! Change that diode (ECG580 or Equiv) also change the 2.2uf & 15uf & 47uf cap in the primary of the SMPS. Jeff Stielau Shoreline Electronics Repair 125 Beechtree Lane Westbrook,CT 06498 860-399-1861 Voice 860-664-3535 Fax jstielau@xxxxxxxx ----- Original Message ----- From: "Maxwell Bailes Jr." <bailes4@xxxxxxxxx> To: "techassit" <techassist@xxxxxxxxxxxxx> Sent: Tuesday, October 30, 2001 11:10 PM Subject: [TechAssist] GE PTV Model#46GW940 shuts down in 10 minutes > > Sorry forgot to put the chassis# in there PTK169PVA > Max > --- "Maxwell Bailes Jr." <bailes4@xxxxxxxxx> wrote: > > Hello, > > This set shuts down in about ten minutes. Hit power > > buttons comes back on,but shuts down in ten minutes > > again.Has a perfect picture when on. Everything > > seems > > to check ok, could cr4118 be causing something like > > this? It can check good,but breakdown under load. > > Anyone had this problem before.Any help would be > > greatly appreciated. > > TIA > > Max > > > ===== > Max Bailes > Bailes Electronics > Rt.4 Box57-A > Hurricane,WV. 25526 > 304-562-7167 > > __________________________________________________ > Do You Yahoo!? > Make a great connection at Yahoo! Personals. > http://personals.yahoo.com > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. > Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.