[TechAssist] Re: GE 19TVR60 TV/VCR, replaced bad flyback, going into HV shutdown.

  • From: "J Silverman" <greentron@xxxxxxx>
  • To: <techassist@xxxxxxxxxxxxx>
  • Date: Mon, 29 Dec 2003 13:01:09 -0500

That voltage is not on in standby.
Jerry Silverman
Greentron Inc
4 Newland Ave
Greenville SC 29609
864 232 3889
Fax 271 2080
mailto:greentron@xxxxxxx
----- Original Message -----
From: "Kevin" <kevintv@xxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Saturday, December 27, 2003 3:59 PM
Subject: [TechAssist] Re: GE 19TVR60 TV/VCR, replaced bad flyback, going
into HV shutdown.


> I found that pin 22 of IV01 is missing the 9 volts (Vcc1) it should have
> when the set is plugged in and turned off.  I am having trouble tracing
> where the 9 volts is supposed to be coming from.  Does someone have the
> print?  TIA.
>
> Kevin Wilks
> Kevin's TV & Video Repair
> Penticton BC Canada
> kevintv@xxxxxxx
>
>
> -----Original Message-----
> From: techassist-bounce@xxxxxxxxxxxxx
> [mailto:techassist-bounce@xxxxxxxxxxxxx] On Behalf Of J Silverman
> Sent: Saturday, December 27, 2003 11:16 AM
> To: techassist@xxxxxxxxxxxxx
> Subject: [TechAssist] Re: GE 19TVR60 TV/VCR, replaced bad flyback, going
> into HV shutdown.
>
> Look at the power light. If it flashes 6 times when you plug in or when
> you
> press the button, the unit is in lock. If it is not in lock, try
> changing
> DP31 (1N4148) on the power board. It is troublesome and if the slightest
> bit
> leaky will cause a false overvoltage shutdown. Also inspect for cracked
> solder especially near the top of the deflection board.
> Jerry Silverman
> Greentron Inc
> 4 Newland Ave
> Greenville SC 29609
> 864 232 3889
> Fax 271 2080
> mailto:greentron@xxxxxxx
> ----- Original Message -----
> From: "Kevin" <kevintv@xxxxxxx>
> To: "TECH-ASSIST" <techassist@xxxxxxxxxxxxx>
> Sent: Friday, December 26, 2003 6:09 PM
> Subject: [TechAssist] GE 19TVR60 TV/VCR, replaced bad flyback, going
> into HV
> shutdown.
>
>
> > I finally got the flyback for this GE TV/VCR and installed it today.
> > The old fly was definitely bad, but the set still is not working.
> When
> > I press the power button once the B+ to the HOT goes up from 118.5 v
> to
> > 119.4 v.  Sometimes the relay will click on and off as I press the
> power
> > button.  I have also heard the HV come up for a split second.  A tape
> > will go in and play but the TV still will not come on.  I can't find
> any
> > shorted diodes or transistors.  Help!
> >
> > Kevin Wilks
> > Kevin's TV & Video Repair
> > Penticton BC Canada
> > kevintv@xxxxxxx
> >
> >
> >
> >
> ************************************************************************
> ****
> *
> > Lost Password:
> > http://www.tech-assist.org  and select "Login Problems?".
> > Email Archives:
> > //www.freelists.org/archives/techassist/
>
> ************************************************************************
> *****
> Lost Password:
> http://www.tech-assist.org  and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/
>
>
****************************************************************************
*
> Lost Password:
> http://www.tech-assist.org  and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/

*****************************************************************************
Lost Password:
http://www.tech-assist.org  and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/

Other related posts:

  1. Home
  2. techassist
  3. Archive
  4. 12-2003