This may or may not help but try it anyway.With remote,push and hold the power button for about 10-15 seconds and see if it comes on.It may be in childlock mode. Mando Birdie's TV & Electronics Casa Grande,AZ. birdie@xxxxxxxxxxxxx CGRIFF4000@xxxxxxx wrote: > GE TV/VCR Model# 13TVR62 Chassis# VDP13/VR21 I need the schematic or > service manual. When I try to turn on, LED flashes 3 times. I already found > the common bad solder joints on the center LED and checked the 2 ic > protectors on the main board. This unit refuses to let me help it! > > Chad > > Griffiths VCR/TV > Schenectady, N.Y. > cgriff4000@xxxxxxx > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.tech-assist.org/change.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.tech-assist.org/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/