Make sure your regulator is working properly, before you suspect "pincussion circuit". -Ed- ----- Original Message ----- From: "Jorge Miret" <jmiret@xxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Wednesday, October 03, 2001 10:44 AM Subject: [TechAssist] Fw: panasonic ct-32g22v pincushion problem > > > ----- Original Message ----- > From: Jorge Miret <jmiret@xxxxxxxx> > To: <techassist-bounce@xxxxxxxxxxxxx> > Sent: Tuesday, October 02, 2001 7:12 PM > Subject: panasonic ct-32g22v pincushion problem > > > > Hi everyone ! > > I got a Panasonic CT-32G22V (CHASSIS ANPEDP282) with pincushion > problem,the > > image is bowed to the inside about 2".I replaced Q751,Q752 and Q753 in the > Z > > Board,the one incharge of the pincushion but still the same problem.Also > all > > resistors are good and replaced the capacitor just in case (they where > ok).I > > have no idea what could be wrong I dont know if I am in the correct > > tarcking. > > Somebody have any idea or suggestion please help !. > > Thank to everybody, > > Jorge Miret-Puerto Rico > > J.C.Video & P.C.Repair. > > tel:787-761-0920. > > jmiret@xxxxxxxx > > . > > > > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. > > Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.