[TCUG] WIG-WAG Controller

  • From: "Whiteside, Robert" <Robert.Whiteside@xxxxxxxxxxxxxxxx>
  • To: <tcug@xxxxxxxxxxxxx>
  • Date: Tue, 29 Apr 2008 09:21:21 +0100

Hi All,
=20Am I correct in saying that Microsense are the only company to produce=
=20a type approved, Wig-Wag controller?. The old ones I have seen from th=
em were MTC's with a different firmware.=20
Are there any guidance notes for wigwags?.
I know there are various companies such as Signature do the heads with a =
built in flasher/controller, as I fitted some of these at Selby swing bri=
dge and Doncaster airport when I worked for Peek.=20
We need to replace a GEC (1014, I think) at a fire station. I understand =
the "wigs" and "wags" must flash in sync, where the Signature units are s=
tand alone units which flashes them independently, as well as having to h=
ave all the lamp monitoring etc.

Does anybody have any guidance or info?

Many Thanks

Rob Whiteside

Traffic Signal Engineer

Rotherham Metropolitan Borough Council
Environment & Development Services

Tel: 01709 823068
Fax: 01709 837797
email: robert.whiteside@xxxxxxxxxxxxxxxx
The information in this e-mail is confidential and is intended for the ad=
dressee only. Access to this e-mail by anyone else has not been authorise=
d by Rotherham Metropolitan Borough Council
It is not to be relied upon by any person other than the addressee except=
=20with our prior written approval. If no such approval is given, we will=
=20not accept any liability (in negligence or otherwise) arising from any=
=20third party acting, or refraining from acting, on such information. Un=
authorised recipients are requested to maintain confidentiality. If you h=
ave received this e-mail in error, please notify us immediately by e-mail=
ing [robert.whiteside@xxxxxxxxxxxxxxxx ]or calling [ 01709 823068 ] or fa=
xing [ 01709 837797 ], and also we would ask you to destroy any copies an=
d delete this e-mail from your computer system. Copyright in this e-mail =
and any document created by us will be and remain vested in us and will n=
ot be transferred to you.



#########################################################################=
############

The information in this e-mail is confidential and intended solely for th=
e use of the
individual to whom it was addressed. If you are not the intended recipien=
t, be
advised that you have received this e-mail in error and that any use, dis=
semination,
forwarding, printing or copying of this e-mail is strictly prohibited. If=
=20you have
received this e-mail in error, please advise the sender by using the repl=
y facility
in your e-mail software, and then delete it from your system.

#########################################################################=
############
-----------------------------------------------------------
A message from the TCUG mailing list. For information about
the list visit //www.freelists.org/webpage/tcug

Other related posts: