[tccrockets] Re: Nike Drag Race

It really was not too much work...and the result was a little better than last 
place.


Jimmy F.
TRA 12524

From: AiRobert 
Sent: Wednesday, May 02, 2012 2:13 PM
To: tccrockets@xxxxxxxxxxxxx 
Subject: [tccrockets] Re: Nike Drag Race

Sounds like a lot of work-just to be in last place!! ;)

 


--------------------------------------------------------------------------------

From: tccrockets-bounce@xxxxxxxxxxxxx [mailto:tccrockets-bounce@xxxxxxxxxxxxx] 
On Behalf Of Jimmy Franco
Sent: Wednesday, May 02, 2012 11:45 AM
To: tccrockets@xxxxxxxxxxxxx
Subject: [tccrockets] Re: Nike Drag Race

 

OK I have my kit built, all left to do is T/T and paint.

Then she will be ready to kick some ass.

Did a custom airfoil effect on the 1/4” thick ply. fins, it looks sweet. Fins 
are 7/16” thick at the root and ~5/16” at the tip. Then the airfoil tapers to 
the leading and trailing edge down to ~3/16”. Fins will be composite of 1/4” 
birch ply, 3/32” basswood, west, and 1.5 fiberglass.

 

Jimmy F.
TRA 12524

 

From: Ron Swenson 

Sent: Sunday, April 29, 2012 8:10 PM

To: tccrockets@xxxxxxxxxxxxx 

Subject: [tccrockets] Re: Nike Drag Race

 

Very nice!

 

From: tccrockets-bounce@xxxxxxxxxxxxx [mailto:tccrockets-bounce@xxxxxxxxxxxxx] 
On Behalf Of James Dougherty
Sent: Saturday, April 28, 2012 7:38 PM
To: tccrockets@xxxxxxxxxxxxx
Subject: [tccrockets] Re: Nike Drag Race

 

Updated the logo

 

K2045 fliers made the first line

 

 

 

 

On Wed, Apr 25, 2012 at 1:18 AM, James Dougherty <jafrado@xxxxxxxxx> wrote:

Sounds like we're gonna have a lot of fun guys, looking forward to it!

Sent from my iPhone


On Apr 24, 2012, at 9:02 PM, Ben Sandoval <yobenflstf@xxxxxxxxxxxxx> wrote:

        I'm in, not sure which dance I'll be doing LMAO.

        --- On Mon, 4/23/12, Ron Swenson <swensonron@xxxxxxxxxxx> wrote:


        From: Ron Swenson <swensonron@xxxxxxxxxxx>
        Subject: [tccrockets] Re: Nike Drag Race
        To: tccrockets@xxxxxxxxxxxxx
        Date: Monday, April 23, 2012, 6:19 PM

        I’ll take one of those K2045’s.  I’m already planning my victory dance!

         

        From: tccrockets-bounce@xxxxxxxxxxxxx 
[mailto:tccrockets-bounce@xxxxxxxxxxxxx] On Behalf Of Jack Garibaldi
        Sent: Monday, April 23, 2012 5:16 PM
        To: TCC -Chat 
        Subject: [tccrockets] Nike Drag Race

         

        Hi All

         

                       Ok James woke up the Nike crowd and I have been getting 
e-mails and phone calls on what we are doing so here it is.

         

        Nike Drag race on any size Nike Smoke you want but it has to have a K 
motor in it or larger if you decide to fly a larger Nike.  Repeat- Has to be a 
Nike Smoke now the motor of choice was the K2045 I will have about 14 or 15 of 
them and if you are in the drag race with a K2045 I will do the motor for 
$99.00 only the K2045 so if you have a Nike and want to fly another motor you 
can but I am not sure why you would want to get your assed kicked with 
something less. I also have  Nike’s in stock in all sizes 4”, 5.5”, 7.5” and 
10” in the Polecat brand and I have a few of the Madcow 4” glass Nikes which 
are basically the Performance Nike’s. I saw a post where Aaron wanted to fly 
the K1103X  well as long as it is in a Nike then fine but the problem Aaron is 
we did this motor as a demo last year and Steve Sawyer got whipped with that 
motor and I talked to Aerotech and they are still not California certified a 
year later, so Karl is going to let me know when it can go into California. So 
any questions?

         

        Jack G
       

 

No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.455 / Virus Database: 271.1.1/4972 - Release Date: 05/01/12 
18:36:00

Other related posts: