Very nice! Ryan, I will update the document and add these links. On Sat, Apr 12, 2014 at 10:32 AM, Ryan Reynolds <rcflyr@xxxxxxxxx> wrote: > Here's last year's race: > https://www.youtube.com/watch?v=ty31xtNHVyY > > slow motion (from Cliff): > https://www.youtube.com/watch?v=RIVVXbZsRvY > > > On Fri, Apr 11, 2014 at 11:09 PM, Cliff Sojourner <cls@xxxxxxxxxxxxx>wrote: > >> >> and this is what it looks like when it happens >> >> https://c2.staticflickr.com/8/7241/7238291674_e61d012ba5_z.jpg >> >> the sound is incomparable! >> >> Cliff >> >> >> On 2014-04-11 22:55, James Dougherty wrote: >> >>> Hi Folks, >>> >>> This year, we are planning the 1/4 Nike Smoke Drag Race. >>> >>> >>> The Nike Smoke Drag race is a mass launch of ¼ scale (4”) Nike Smoke >>> High Power rockets using (54/2560) engines. Mach-1 is typical for a 10lb >>> rocket, maximum altitude is expected to be 5-8K AGL and recovery can be >>> anywhere from ½ mile to 1 mile away. >>> >>> When three or more rockets (at least one high power) are launched >>> simultaneously, the minimum distance for all involved rockets shall be the >>> lesser of twice the complex distance for the total installed impulse - for >>> a K motor, 600 feet is double the complex K impulse Minimum Safe Distance >>> >>> We will be using the away pad with the relay and extra 4-way breakers >>> which Ron built us. This means we will setup the Away pad at 600' for >>> DairyAire as we did last year. When we launch, we will swap out the relays >>> for the two breakers and add the 4-way allowing for 12 vehicles to be >>> launched. >>> >>> You need to be an L2 flyer to contend in the Drag race. >>> You cannot certify L2 flying in the drag drace. >>> >>> The sign-up sheet is here: >>> >>> https://docs.google.com/spreadsheet/ccc?key=0Aiev7456s_ >>> ondEJOTzR4blFEVEVIRlVKcnl5Qk44Ymc&usp=drive_web#gid=2 >>> >>> Mike (BAR) said he would order 20 K2045's for the 2014 launch. Please >>> contact him and buy a motor. >>> >>> You can get the original Performance Rocketry 1/4 Scale Nike Smoke kit >>> with injection molded fins (this was the one I use) from Rocketry Warehouse >>> here: >>> >>> http://rocketrywarehouse.com/product_info.php?products_id=300 >>> >>> If you order now, you can easily have a competitive bird in time for DA >>> >>> The rules/history and documentation can be found here: >>> >>> http://www.tccrockets.com/documents/QSNSDR.pdf >>> >>> The paint scheme is here: >>> https://docs.google.com/document/d/19xOCzqlYTJpArFiU4vPO5- >>> eut9rGeEyuhYfnkN0e8NU/edit >>> >>> The original G. Harry Stine drawing is here: >>> https://docs.google.com/file/d/1pd8xSIlzt2CGdCBEnp_SEUCDur4- >>> tDtUa9QJDTjdog6P2oZqDP9bzLVdrL9J/edit >>> >>> The badge for the T-Shirt if you want to make your own T-Shirts is >>> attached below. >>> >>> Thanks and everyone who is flying sign up now! >>> >>> -James >>> >>> >>> >> >> >