Looking good Gerald. Is it going to be roadworthy by March 27 for a drive to the Nac show. We are not that far from you. --- On Wed, 3/3/10, Gerald Livingston <gerald.tcb@xxxxxxxxxxxxx> wrote: From: Gerald Livingston <gerald.tcb@xxxxxxxxxxxxx> Subject: [tcb] tape scrub glue scrub strip scrape scrub strip scrape scrub rinse zinc coat rinse paint Whew! To: tcb@xxxxxxxxxxxxx Date: Wednesday, March 3, 2010, 7:47 PM tape scrub glue scrub strip scrape scrub strip scrape scrub rinse zinc coat rinse paint Whew! Shiny POR-15. That stuff goes a LONG way when you're not worried about 2-coating because it's going to be in a 0-traffic area (covered by plywood). Lots of rust but only minor pitting in most places. Some pinholes but no seriously thin metal. I'll J-B Weld the pinholes. I got black POR because most of it will be in covered places and I wanted the contrast to see where I'm painting it. I'll topcoat any visible places later. Last seal on the pop-top. Have to figure out how to clean up the excess glue sprayed by my overzealous helper. http://www.texasvolksbus.org/1970/2010-02-22_2010-03-03/index.html G2