[tcb] Re: low beam high beam switch
- From: ken linoski <dblcab67@xxxxxxxxx>
- To: tcb@xxxxxxxxxxxxx
- Date: Thu, 4 Mar 2010 10:05:22 -0600
i believe all tax office/vehicle registrations locations do them now. before
in tarrant county only 1 office could inspect your plates and approve them
then you had to go to another office to register them and yet send in a
seperate payment to austin for YOM plates---wait--- then you could register
them like any other plate. now thats all changed and everything including
payment is done at local office. 1 note here. DPS USED to let you register
YOM plates even if the YOM plate number was already in use. I believe that
policy has changed. If YOM plate number is in use you cant put it on your
car. I know because i was pulled over by a cop in southlake because my
"PLATE" had a warrant on it or so says the cop. when cop confirmed i was not
the driver that the warrant was attached to via the plate he let me go. i
contacted the DPS the next day and they assured me that my YOM plate number
was in fact being used by TWO other registered cars in Texas. only solution
was to put on new issue plates. i chose to keep my YOM 67 plates and take
the chance of getting pulled over again. also the cop that pulled me over
knew B4 hand that i wasnt the perp cuz his computer shows the plate# and
make model of car that the warrant is for along with the name of the person
regisered to it. I was in a 67 bus. he was pulling me over for the fun of
it. I never had a cop be so nice to me for pulling me over. i guess he was
hoping for a sean penn moment out of that movie which title escapes me now.
but alas i was just on my way home from work at 11pm.........
Ken
On Thu, Mar 4, 2010 at 6:33 AM, <wuzmop@xxxxxxx> wrote:
> I think the Austin thing is only for classic, not antique.
>
>
>
> -----Original Message-----
> From: James Dwan <james_dwan_2000@xxxxxxxxx>
> To: tcb@xxxxxxxxxxxxx
> Sent: Wed, Mar 3, 2010 5:34 pm
> Subject: [tcb] Re: low beam high beam switch
>
> The form that gets sent to Austin is after the fact though right? The
> girl I talked to indicated that I would be on my way that same day. The wait
> would be for Austin to send the plates back or somethin' like that.
>
> --- On *Wed, 3/3/10, w.wood <evil.scientist.boo@xxxxxxxxx>* wrote:
>
>
> From: w.wood <evil.scientist.boo@xxxxxxxxx>
> Subject: [tcb] Re: low beam high beam switch
> To: tcb@xxxxxxxxxxxxx
> Date: Wednesday, March 3, 2010, 12:24 PM
>
> There's a form that has to be sent in to Austin. Yes, the plates must not
> be rust buckets but it depends on the Tax Office you go to. I found that my
> local one has anal retentive SFBs running it, but in the next city they're
> much nicer and will let "a little rust" get by.
> You'll also find that most of the Tax Office Buearotards don't grok Antique
> stuff. You'll also now have the nice new Window Sticker to go with it. No
> tags on the plates anymore.
>
>
>
> On Wed, Mar 3, 2010 at 11:55 AM, Eric Woodall <eric@xxxxxxxxxxxxxx> wrote:
>
>> They don't have to send them to Austin, however to register your YOM
>> plates they have to be in very good shape.
>> I have heard of DPS not accepting certain plates that were rusty and such.
>> Easy process. It'll take all of about 5 minutes, after you wait in the
>> long line.
>>
>> James Dwan wrote:
>> > Sweet - so I just take the title & plates to the clerk and voila? Or
>> > do they send something off to Austin?
>> >
>> > --- On *Wed, 3/3/10, wuzmop@xxxxxxx /<wuzmop@xxxxxxx>/* wrote:
>> >
>> >
>> > From: wuzmop@xxxxxxx <wuzmop@xxxxxxx>
>> > Subject: [tcb] Re: low beam high beam switch
>> > To: tcb@xxxxxxxxxxxxx
>> > Date: Wednesday, March 3, 2010, 10:36 AM
>> >
>> > You can register the BW plates as antiques..
>> >
>> >
>> >
>> > -----Original Message-----
>> > From: James Dwan <james_dwan_2000@xxxxxxxxx>
>> > To: tcb@xxxxxxxxxxxxx
>> > Sent: Wed, Mar 3, 2010 8:41 am
>> > Subject: [tcb] Re: low beam high beam switch
>> >
>> > Yeah it's pricey but I want to get it inspected this month so I
>> > can run the B & W plates I found otherwise I guess I would need to
>> > go antique so I wouldn't need an inspection sticker. How long does
>> > that take BTW?
>> >
>> > --- On *Wed, 3/3/10, sammie smith /<bugcollections@xxxxxxxxxxxxx
>> > </mc/compose?to=bugcollections@xxxxxxxxxxxxx>>/* wrote:
>> >
>> >
>> > From: sammie smith <bugcollections@xxxxxxxxxxxxx
>> > </mc/compose?to=bugcollections@xxxxxxxxxxxxx>>
>> > Subject: [tcb] Re: low beam high beam switch
>> > To: tcb@xxxxxxxxxxxxx </mc/compose?to=tcb@xxxxxxxxxxxxx>
>> > Date: Wednesday, March 3, 2010, 8:22 AM
>> >
>> > Ya got me on that one James. Never paid much attention to
>> > them other than the difference between screw terminals and
>> > push ons. Other than that as far as I know they are all the
>> > same. I wouldn't pay $45 for that one on the samba though.
>> >
>> > --- On *Wed, 3/3/10, James Dwan /<james_dwan_2000@xxxxxxxxx
>> > </mc/compose?to=james_dwan_2000@xxxxxxxxx>>/* wrote:
>> >
>> >
>> > From: James Dwan <james_dwan_2000@xxxxxxxxx
>> > </mc/compose?to=james_dwan_2000@xxxxxxxxx>>
>> > Subject: [tcb] low beam high beam switch
>> > To: tcb@xxxxxxxxxxxxx </mc/compose?to=tcb@xxxxxxxxxxxxx>
>> > Date: Wednesday, March 3, 2010, 7:14 AM
>> >
>> > My 59 is toast. Will a '55-'57 work? It looks very close
>> > to mine:
>> >
>> > http://www.thesamba.com/vw/classifieds/detail.php?id=663737
>> >
>> >
>> > James
>> >
>> >
>> >
>> >
>>
>>
>>
>
>
> --
> My Email Moniker
> http://www.findinternettv.com/Video,item,1570570433.aspx
>
>
>
Other related posts:
