[tcb] Re: engine to body
- From: ATX BUS <atx_bus@xxxxxxxxx>
- To: tcb@xxxxxxxxxxxxx
- Date: Tue, 6 May 2008 13:08:01 -0700 (PDT)
So I should install it complete.
----- Original Message ----
From: Will Wood <evilscientistboo@xxxxxxxxxxxxx>
To: tcb@xxxxxxxxxxxxx
Sent: Tuesday, May 6, 2008 2:53:50 PM
Subject: [tcb] Re: engine to body
It was at the factory as well otherwise you'd never get it in the channel in
the apron.
-----Original Message-----
From: mechmark@xxxxxxxxxxx
Sent: May 6, 2008 2:40 PM
To: tcb@xxxxxxxxxxxxx
Subject: [tcb] Re: engine to body
Most people cut it to make it simple to remove the rear apron. It originally
was not cut and was removed when the apron was removed.
-------------- Original message --------------
From: ATX BUS <atx_bus@xxxxxxxxx>
Sorry Duncan another VW question?
I purchased a new engine to body seal from WW.
http://www.wolfsburgwest.com/cart/DetailsList.cfm?ID=111813705a
It is a U shaped piece that extends from the rear of the engine tin to both the
left and right side of the bus. Should this be one piece or should I cut it so
that I can remove metal (under the deck lid) with out removing the entire seal?
Hopefully this makes sense.
Jeff
________________________________
Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now.
____________________________________________________________________________________
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile. Try it now.
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
Other related posts: