[sib-access] Re: AW: Re: AW: Re: AW: Re: sibelius 6.2 update available
- From: "Dave Carlson" <dgcarlson@xxxxxxxxxxxxx>
- To: <sib-access@xxxxxxxxxxxxx>
- Date: Sat, 1 May 2010 13:59:42 -0700
Claudio,
I tried to do what you suggest: "Unzip the exe file in a specified folder."
Will not work. This file is not a self-extracting zip file.
The file name: Sibelius62Full.exe
But I was able to upgrade using the other installer, so that's okay.
Dave
----- Original Message -----
From: "Claudio Sacco" <cl.sacco@xxxxxxxx>
To: <sib-access@xxxxxxxxxxxxx>
Sent: Friday, April 30, 2010 10:13 PM
Subject: [sib-access] Re: AW: Re: AW: Re: AW: Re: sibelius 6.2 update
available
Hi Dave
You are not presented with a blank page, but there are inaccessible frames
to click, where you choose, what you want to install, one by one. But there
is a way to work around it. Unzip the exe file in a specified folder. After
that you will find the installation files of Sibelius, Audioscore,
Photoscore lite, Sound essentials and Scorch in it. Install this all if you
like or choose the one you want, but it is best to start with Sibelius. It
works perfectly. Not that the installer of scorch takes very long to start,
so be very patient, when you start the installation of scorch. Alt the other
installers start immediately after pressing enter on them.
Good luck
Claudio
> -----Original Message-----
> From: sib-access-bounce@xxxxxxxxxxxxx
> [mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of Dave Carlson
> Sent: Saturday, May 01, 2010 6:05 AM
> To: sib-access@xxxxxxxxxxxxx
> Subject: [sib-access] Re: AW: Re: AW: Re: AW: Re: sibelius
> 6.2 update available
>
> Ben,
>
> Thanks for the tip. I finally downloaded the full (2.6 Gb)
> file. Then I launched it and after it finally extracted, I
> was presented with a blank screen titled "Sibelius 6.2".
>
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
If you wish to unsubscribe, send a blank message
with the single word, unsubscribe - in the Subject line to:
sib-access-request@xxxxxxxxxxxxx
Other related posts:
