[SI-LIST] Re: using spice to calculate driver output impedance
- From: Steve Weir <weirsi@xxxxxxxxxx>
- To: ericsilist@xxxxxxxxx, si-list@xxxxxxxxxxxxx
- Date: Wed, 23 Feb 2005 17:13:48 -0800
Eric, the inductive reactance will not add linearly. Do the vector
addition and you will find that the resistor value will be a lot closer to
the 35.5 ohms that the resistive slope would lead to by itself. Off the
top of my head, I think you will find 30-33 ohms about right.
Steve
At 04:11 PM 2/22/2005 -0800, eric steimle wrote:
>Hi all, I'm having some trouble thinking of the right
>way to calculate driver impedance using spice. I have
>finally a functioning model of the driver in question
>and I've been able to run some simulations with it. I
>was hoping that there might be an accepted way of
>calculating driver impedance out there that I don't
>know about, or perhaps some literature you could point
>me to. Any help would be greatly appreciated.
>
>Best Regards,
>Eric
>
>
>
>__________________________________
>Do you Yahoo!?
>The all-new My Yahoo! - What will yours do?
>http://my.yahoo.com
>------------------------------------------------------------------
>To unsubscribe from si-list:
>si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
>or to administer your membership from a web page, go to:
>http://www.freelists.org/webpage/si-list
>
>For help:
>si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
>List FAQ wiki page is located at:
> http://si-list.org/wiki/wiki.pl?Si-List_FAQ
>
>List technical documents are available at:
> http://www.si-list.org
>
>List archives are viewable at:
> http://www.freelists.org/archives/si-list
>or at our remote archives:
> http://groups.yahoo.com/group/si-list/messages
>Old (prior to June 6, 2001) list archives are viewable at:
> http://www.qsl.net/wb6tpu
>
The weirsp@xxxxxxxxxx e-mail address will terminate March 31, 2005.
Please update your address book with weirsi@xxxxxxxxxx
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
- Follow-Ups:
- [SI-LIST] Re: using spice to calculate driver output impedance
- From: Eric Steimle
- References:
- [SI-LIST] using spice to calculate driver output impedance
- From: eric steimle
Other related posts:
- » [SI-LIST] using spice to calculate driver output impedance
- » [SI-LIST] Re: using spice to calculate driver output impedance
- » [SI-LIST] Re: using spice to calculate driver output impedance
- » [SI-LIST] Re: using spice to calculate driver output impedance
- » [SI-LIST] Re: using spice to calculate driver output impedance
- » [SI-LIST] Re: using spice to calculate driver output impedance
- » [SI-LIST] Re: using spice to calculate driver output impedance
- [SI-LIST] Re: using spice to calculate driver output impedance
- From: Eric Steimle
- [SI-LIST] using spice to calculate driver output impedance
- From: eric steimle