[SI-LIST] using spice to calculate driver output impedance

Hi all, I'm having some trouble thinking of the right
way to calculate driver impedance using spice.  I have
finally a functioning model of the driver in question
and I've been able to run some simulations with it.  I
was hoping that there might be an accepted way of
calculating driver impedance out there that I don't
know about, or perhaps some literature you could point
me to.  Any help would be greatly appreciated.

Best Regards,
Eric


                
__________________________________ 
Do you Yahoo!? 
The all-new My Yahoo! - What will yours do?
http://my.yahoo.com 
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List FAQ wiki page is located at:
                http://si-list.org/wiki/wiki.pl?Si-List_FAQ

List technical documents are available at:
                http://www.si-list.org

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: