[SI-LIST] Re: s-parameter in cadence
- From: "Lynne D. Green" <lgreen22@xxxxxxxxxxxxxx>
- To: <azizi_kamran@xxxxxxxxx>
- Date: Thu, 6 Oct 2005 15:32:13 -0700
If it were me, I would contact Agilent and/or Cadence for Support.
- Lynne
-----Original Message-----
From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx] On
Behalf Of Kamran Azizi
Sent: Thursday, October 06, 2005 1:52 PM
To: si-list@xxxxxxxxxxxxx
Subject: [SI-LIST] s-parameter in cadence
I am having a lot of problem in using s parameter out of HFSS in cadence
spectere. Seems like there are some tricky setups except fmax, step, .....
any help? I appreciate it
Kami
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
