[SI-LIST] Re: s-parameter in cadence
- From: "Ray Anderson" <ray.anderson@xxxxxxxxxx>
- To: <si-list@xxxxxxxxxxxxx>
- Date: Thu, 6 Oct 2005 15:37:28 -0700
Ansoft would be a better shot than Agilent for HFSS.....
-Ray
-----Original Message-----
From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx]
On Behalf Of Lynne D. Green
Sent: Thursday, October 06, 2005 3:32 PM
To: azizi_kamran@xxxxxxxxx
Cc: si-list@xxxxxxxxxxxxx
Subject: [SI-LIST] Re: s-parameter in cadence
If it were me, I would contact Agilent and/or Cadence for Support.
- Lynne=20
-----Original Message-----
From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx]
On
Behalf Of Kamran Azizi
Sent: Thursday, October 06, 2005 1:52 PM
To: si-list@xxxxxxxxxxxxx
Subject: [SI-LIST] s-parameter in cadence
I am having a lot of problem in using s parameter out of HFSS in cadence
spectere. Seems like there are some tricky setups except fmax, step,
.....
any help? I appreciate it
=20
Kami
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
