Hi, I am working on an ASIC that has a 3.3V PCI 2.1 complianace interface and I am doing hspice simulation on the output buffer. I understand PCI uses reflected wave switching, so a buffer must not be too strong. My question is, is there a requirement saying that if the output before reflection is higher than a certain voltage, the driver is too strong? I couldn't find it in the specification itself. Thanks. Ivor. -- ************************************************************** Ivor Ting Email: ivor.ting@xxxxxxxxxxx ASIC Development, Alcatel CID Phone: (604)-453-3208 Suite 400-4190 Still Creek Drive Fax : (604)-421-2644 Burnaby, B.C., Canada, V5C 6C6 Web : www.cid.alcatel.com ************************************************************** ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu